Chamber adjustment

poopstang · 08-25-2001, 11:32 AM

I have a 90 GT with steeda 1.25 lowering springs. The alignment shop said i needed chamber kits? I still have some adjustment on the stock chamber plates(2 holes on the plates). This shop did even attempt to adjust them.

My ? is can i get the correct chamber out of the factory plates with a 1.25 drop?

jimberg · 08-25-2001, 12:46 PM

You must have caster/camber plates to get a proper alignment if you lower your car.

------------------
351W 89 Mustang GT Convertible

poopstang · 08-25-2001, 03:56 PM

Steeda told me I didn't need caster/chambers, but it was a good idea.
Ford Racing sells 7/8 lowering springs that don't require caster/chambers, 1.25 isn't much more. The factory slots have at least a .25 of adjustment(2 holes on the caster/chamber plates)

poopstang · 08-26-2001, 05:59 PM

08-25-2001, 11:32 AM	#1
poopstang Registered Member Join Date: Mar 2001 Location: palmbayFL Posts: 184	Chamber adjustment I have a 90 GT with steeda 1.25 lowering springs. The alignment shop said i needed chamber kits? I still have some adjustment on the stock chamber plates(2 holes on the plates). This shop did even attempt to adjust them. My ? is can i get the correct chamber out of the factory plates with a 1.25 drop?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
combustion chamber	lx5091	Windsor Power	4	10-13-2002 08:25 PM
Combustion chamber size	Ieatcamaros	Windsor Power	25	07-23-2002 09:25 AM
1 chamber or 2 chamber flowmaster mufflers	pete1	Windsor Power	1	09-02-2001 07:00 PM
1 chamber or 2 chamber mufflers????	fast93gt50	Windsor Power	4	01-19-2001 11:51 AM
1 chamber or 2 chamber mufflers????	fast93gt50	Stang Stories	3	01-19-2001 09:26 AM

08-25-2001, 12:46 PM	#2
jimberg Registered Member Join Date: Oct 1998 Location: Rogers, MN Posts: 2,089	You must have caster/camber plates to get a proper alignment if you lower your car. ------------------ 351W 89 Mustang GT Convertible

08-25-2001, 03:56 PM	#3
poopstang Registered Member Join Date: Mar 2001 Location: palmbayFL Posts: 184	Steeda told me I didn't need caster/chambers, but it was a good idea. Ford Racing sells 7/8 lowering springs that don't require caster/chambers, 1.25 isn't much more. The factory slots have at least a .25 of adjustment(2 holes on the caster/chamber plates)

08-26-2001, 05:59 PM	#4
poopstang Registered Member Join Date: Mar 2001 Location: palmbayFL Posts: 184	?