New Ads

StangFlyer · 12-01-1999, 03:21 AM

Before anyone says anything, be patient concerning the new ads on the system. Many are delivered using IFrames, Layers, and rich media and are recking a little havock with the back button on your browser. I am in the process of converting the site back to having it display a banner at the top of every content page and I'll be eliminating the auto refreshing banner frame all together with in the next few days....

------------------
Dan McClain, Editor
The Mustang Works Online
1991 Mustang GT - 10.90 @ 122 Mph
Built, Blown, and Fast as Hell!

Rebel79 · 12-01-1999, 12:59 PM

I was wondering if it was just my PC....

------------------
'94 Cobra
308ci, ported GT-40 heads, Crane 2031 cam .513"/.529" lift 276°/282° duration, 70mm TB, Custom 80mm MAF, JMS chip, Vortech S-trim 8#, MSD, TREX fuel pump, Accel coil, 3.55's, FMS 1 5/8 headers, BBK Offroad H-pipe, and 2-chamber flows.
1994 Mustang Cobra
Check out the pics of my Motor Buildup!

95ragtop · 12-01-1999, 03:33 PM

Thanks Dan, I was going to get my MIS guy in here, and then I would have to explain what I doing on your site at work

.

Later,
Dave

PKRWUD · 12-01-1999, 03:42 PM

I too was concerned, but as I've said before, this site is in good hands.

Take care,
~Chris

------------------
Moderator
MustangNet

RACECAR spelled backwards is RACECAR

HEY !!! Are you ASE Certified ??? If you are, ask me about iATN. The best tool you'll ever have, and it's free !!!
'64 Falcon/Ranchero: 302+.040, 10.5:1, .475", 282 Dur., Perf. RPM, Holley 750 Dbl Pumper, MSD, 4-Spd., 8.8 w/3.73 posi. = 12.888 @109 MPH

1990GT · 12-03-1999, 06:30 PM

just came in here to see if anyone else was having problems, i guess so

97 Aztec · 12-06-1999, 01:06 AM

Me too...this sux BAD!

------------------
97 Aztec Gold GT w/Steeda heads,intake,TB,
shifter,headers, subframe conn. 3"flowmaster exhaust and
125 hp NOS

StangFlyer · 12-06-1999, 01:14 AM

Read my post in the Blue Oval Lounge concerning this.. Do not use your browsers back button. Use the back button located at the bottom of this sites layout! It will work and not mess with the ad frame.

------------------
Dan McClain, Editor
The Mustang Works Online
1991 Mustang GT - 10.90 @ 122 Mph
Built, Blown, and Fast as Hell!

posey86gt · 12-07-1999, 09:53 AM

I tried using the "back" button at the bottom of the page, and it just sat there with the hour glass turning for two or three minutes. Gave up and hit the 'stop" button.

StangFlyer · 12-07-1999, 11:01 PM

Hmmm, just out of curiousity, what browser are you using, what version, and what computer (platform) are you using.

I'm using Netscape 4.7 and IE 5.x and it works well. I believe I also testing it on Netscape 3 and IE 3 and it worked. But, let me know what you have.

------------------
Dan McClain, Editor
The Mustang Works Online
1991 Mustang GT - 10.90 @ 122 Mph
Built, Blown, and Fast as Hell!

Rebel79 · 12-09-1999, 01:19 AM

The back button periodically does not work on both of my machines.

My work machine runs NT 4.0 and IE 5.0

My Home machine runs 98 and IE 4.72.3110

------------------
'94 Cobra
308ci, ported GT-40 heads, Crane 2031 cam .513"/.529" lift 276°/282° duration, 70mm TB, Custom 80mm MAF, JMS chip, Vortech S-trim 8#, MSD, TREX fuel pump, Accel coil, 3.55's, FMS 1 5/8 headers, BBK Offroad H-pipe, and 2-chamber flows.
1994 Mustang Cobra
Check out the pics of my Motor Buildup!

12-09-1999, 02:08 AM

Dan I also have been having problems with the back button on the site.I'm using Internet Explorer 4.0

stangsrule · 12-10-1999, 04:27 AM

Me too and I am using IE 5.0

posey86gt · 12-10-1999, 04:11 PM

I am using IE 4.0 with Windows95. This is all on an 200MHZ Pentium "IBM Compatible" connected via T1.

Thanks for your hard work, Dan!

StangFlyer · 12-11-1999, 08:04 PM

Ok, just to make sure we are all on the same page everyone, I was talking about and referring to the back button provided in the site layout at the bottom-left of MustangWorks.com, NOT your web browser's back button. Is this the one not working for you? It should work perfectly for any 4.x browser, for sure.

------------------
Dan McClain, Editor
The Mustang Works Online
1991 Mustang GT - 10.90 @ 122 Mph
Built, Blown, and Fast as Hell!

stangsrule · 12-12-1999, 12:55 AM

Yes Dan, for me anyway the site back button as well as the browser back button both are acting up. Have to hit it once for every add that has popped up while I was reading, typing or whatever....

Rebel79 · 12-13-1999, 10:41 AM

Dan, I have been using YOUR back button at the bottom-left corner since you put it there. I am having problems. NT 4 w/ IE 5. Win98 w/ IE4

posey86gt · 12-15-1999, 01:53 PM

Both "back" buttons are giving me problems.

joe4speed · 12-15-1999, 02:32 PM

Yes IE 5.0 and Win 98 and sometimes the crappy AOL browser too! I get it too!! My clicker finger is getting buff!!!

12-01-1999, 03:21 AM	#1
StangFlyer Founder Join Date: Jun 1995 Location: Michigan Posts: 19,326	New Ads Before anyone says anything, be patient concerning the new ads on the system. Many are delivered using IFrames, Layers, and rich media and are recking a little havock with the back button on your browser. I am in the process of converting the site back to having it display a banner at the top of every content page and I'll be eliminating the auto refreshing banner frame all together with in the next few days.... ------------------ Dan McClain, Editor The Mustang Works Online 1991 Mustang GT - 10.90 @ 122 Mph Built, Blown, and Fast as Hell!

12-01-1999, 12:59 PM	#2
Rebel79 News Editor Join Date: Apr 1999 Location: Concord, CA Posts: 2,101	I was wondering if it was just my PC.... ------------------ '94 Cobra 308ci, ported GT-40 heads, Crane 2031 cam .513"/.529" lift 276°/282° duration, 70mm TB, Custom 80mm MAF, JMS chip, Vortech S-trim 8#, MSD, TREX fuel pump, Accel coil, 3.55's, FMS 1 5/8 headers, BBK Offroad H-pipe, and 2-chamber flows. 1994 Mustang Cobra Check out the pics of my Motor Buildup!

12-01-1999, 03:33 PM	#3
95ragtop Registered Member Join Date: Feb 1999 Location: Palmdale, CA USA Posts: 59	Thanks Dan, I was going to get my MIS guy in here, and then I would have to explain what I doing on your site at work . Later, Dave

12-01-1999, 03:42 PM	#4
PKRWUD Junior Member Join Date: Mar 1999 Location: Ventura, California Posts: 8,981	I too was concerned, but as I've said before, this site is in good hands. Take care, ~Chris ------------------ Moderator MustangNet RACECAR spelled backwards is RACECAR HEY !!! Are you ASE Certified ??? If you are, ask me about iATN. The best tool you'll ever have, and it's free !!! '64 Falcon/Ranchero: 302+.040, 10.5:1, .475", 282 Dur., Perf. RPM, Holley 750 Dbl Pumper, MSD, 4-Spd., 8.8 w/3.73 posi. = 12.888 @109 MPH

12-03-1999, 06:30 PM	#5
1990GT Registered Member Join Date: Apr 1999 Location: METHUEN, MA USA Posts: 193	just came in here to see if anyone else was having problems, i guess so

12-06-1999, 01:06 AM	#6
97 Aztec Registered Member Join Date: Nov 1999 Location: Springfield,MO USA Posts: 85	Me too...this sux BAD! ------------------ 97 Aztec Gold GT w/Steeda heads,intake,TB, shifter,headers, subframe conn. 3"flowmaster exhaust and 125 hp NOS

12-06-1999, 01:14 AM	#7
StangFlyer Founder Join Date: Jun 1995 Location: Michigan Posts: 19,326	Read my post in the Blue Oval Lounge concerning this.. Do not use your browsers back button. Use the back button located at the bottom of this sites layout! It will work and not mess with the ad frame. ------------------ Dan McClain, Editor The Mustang Works Online 1991 Mustang GT - 10.90 @ 122 Mph Built, Blown, and Fast as Hell!

12-07-1999, 09:53 AM	#8
posey86gt Registered Member Join Date: Aug 1999 Location: Madison, Alabama, USA Posts: 19	I tried using the "back" button at the bottom of the page, and it just sat there with the hour glass turning for two or three minutes. Gave up and hit the 'stop" button.

12-07-1999, 11:01 PM	#9
StangFlyer Founder Join Date: Jun 1995 Location: Michigan Posts: 19,326	Hmmm, just out of curiousity, what browser are you using, what version, and what computer (platform) are you using. I'm using Netscape 4.7 and IE 5.x and it works well. I believe I also testing it on Netscape 3 and IE 3 and it worked. But, let me know what you have. ------------------ Dan McClain, Editor The Mustang Works Online 1991 Mustang GT - 10.90 @ 122 Mph Built, Blown, and Fast as Hell!

12-09-1999, 01:19 AM	#10
Rebel79 News Editor Join Date: Apr 1999 Location: Concord, CA Posts: 2,101	The back button periodically does not work on both of my machines. My work machine runs NT 4.0 and IE 5.0 My Home machine runs 98 and IE 4.72.3110 ------------------ '94 Cobra 308ci, ported GT-40 heads, Crane 2031 cam .513"/.529" lift 276°/282° duration, 70mm TB, Custom 80mm MAF, JMS chip, Vortech S-trim 8#, MSD, TREX fuel pump, Accel coil, 3.55's, FMS 1 5/8 headers, BBK Offroad H-pipe, and 2-chamber flows. 1994 Mustang Cobra Check out the pics of my Motor Buildup!

12-09-1999, 02:08 AM	#11
Mustanguy Guest Posts: n/a	Dan I also have been having problems with the back button on the site.I'm using Internet Explorer 4.0

12-10-1999, 04:27 AM	#12
stangsrule Registered Member Join Date: May 1999 Location: Indiana Posts: 512	Me too and I am using IE 5.0

12-10-1999, 04:11 PM	#13
posey86gt Registered Member Join Date: Aug 1999 Location: Madison, Alabama, USA Posts: 19	I am using IE 4.0 with Windows95. This is all on an 200MHZ Pentium "IBM Compatible" connected via T1. Thanks for your hard work, Dan!

12-11-1999, 08:04 PM	#14
StangFlyer Founder Join Date: Jun 1995 Location: Michigan Posts: 19,326	Ok, just to make sure we are all on the same page everyone, I was talking about and referring to the back button provided in the site layout at the bottom-left of MustangWorks.com, NOT your web browser's back button. Is this the one not working for you? It should work perfectly for any 4.x browser, for sure. ------------------ Dan McClain, Editor The Mustang Works Online 1991 Mustang GT - 10.90 @ 122 Mph Built, Blown, and Fast as Hell!

12-12-1999, 12:55 AM	#15
stangsrule Registered Member Join Date: May 1999 Location: Indiana Posts: 512	Yes Dan, for me anyway the site back button as well as the browser back button both are acting up. Have to hit it once for every add that has popped up while I was reading, typing or whatever....

12-13-1999, 10:41 AM	#16
Rebel79 News Editor Join Date: Apr 1999 Location: Concord, CA Posts: 2,101	Dan, I have been using YOUR back button at the bottom-left corner since you put it there. I am having problems. NT 4 w/ IE 5. Win98 w/ IE4

12-15-1999, 01:53 PM	#17
posey86gt Registered Member Join Date: Aug 1999 Location: Madison, Alabama, USA Posts: 19	Both "back" buttons are giving me problems.

12-15-1999, 02:32 PM	#18
joe4speed He said Member...heh, heh Join Date: Sep 1999 Location: Jupiter, Florida U.S.A. Posts: 3,718	Yes IE 5.0 and Win 98 and sometimes the crappy AOL browser too! I get it too!! My clicker finger is getting buff!!!