any one put a c-4 in a 79-93 stang

[jays306LX]

well that is what i ment i took my dremel today and cut the factory weld found out that one was already broke and had a budd y of mine reweld it tonight longer welds.. i could not believe the factory welds off of this cross member were the size of a bbe in dia and about a 1/4 inch long.. i was like hell.. but yea that is what i did

------------------
84 lx coupe 75 truck block .030 over trw 10-1 pistons comp magnum 280h .512 .512 lift with 230 duration.. early casting heads 1.94 1.60 valves 58 cc chambers harland sharp rockers 1.6 air gap intake with mild porting holley 600 vac seconderies 2 inch open spacer. built man c-4 with PI 2800 sthall 8.8 strange spool 3.73's moser 31 spline still building the rest going for high to mid 11's