kickin and spittin

[mudchucker]

Originally Posted by USMC302

Then you should have a schrieder valve on the fuel rail, all 87-95 stangs came with one on them. I wanna say I've seen a regulator that had a pressure guage off of it, but not sure. that would be the only other way, unless you get aftermarket fuel lines.

What do you mean when you say your running it at "full advance"?

What is the timing set at right now? Are you pulling any codes?

The timing is at 32 with the plug pulled. The plug is that ecm module that disables the computer from adjusting the timing, i can't remember the name of the plug right off hand. Not reading any codes. As far as the rail, i don't have the valve on mine for some reason. I checked the other rails i have and they both have it, but this one does not. Of course, this is the only rail where the fuel lines come out on the correct side, or i could just switch them out and do it that way. would a lack of fuel pressure at the rail cause it to kick and sputter, then somtimes even backfire when i am getting on it hard, or would it just run weak?
any ideas on what to cehck would be greatly appreciated