

© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
![]() |
#2 |
I'd rather be basketweaving
Join Date: Feb 2000
Location: Indianapolis
Posts: 2,551
|
![]() I'd say you'll be lookin at somewhere about 300rwhp. Which with some good tires and driving could have you in the mid-low 12's.
I'd skip the 65 and go with a 70mm TB. You won't NEED 24lb injectors but if you stay with 19's then you'll have to have your fuel pressure way up there. I've heard that people have tuning problems with 24lb'ers so I'd skip those as well and grab some 30's good luck with it
__________________
NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft |
![]() |
![]() |
Thread Tools | |
Display Modes | Rate This Thread |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
eibach advice needed | mustardjohn | Small Ponies | 6 | 08-19-2012 08:12 PM |
Advice on injectors...PKRWUD I'd like your advice on this one as well | silver_pilate | Windsor Power | 3 | 06-09-2003 08:59 AM |
Header advice | mustangLX92 | Windsor Power | 8 | 11-09-2001 02:43 AM |
Building a 351w, advice | dinomite | Windsor Power | 1 | 02-06-2001 03:20 AM |