Need Power What Should I Do Next? Thanks

chris91LX · 04-01-2002, 12:36 AM

You should get a good idea of the diretion you want to go as far as performance. If this car is a daily driver it's going to make your choices a little differen't. I'd suggest going with headers and a cat back system as your first mods. Undeerdrive pullies would be a nice addition but i would highly recomend you go with a 130amp alternator as you live in a hot climate where you will need to use the A/C. An adjustable fuel pressure regulator will give you a few hp and really help with bigger mods int he future. After that if you plan on going with heads, cam and intake in the future I'd recomend you look at getting a throttle body and mass air sensor. It'd be a good idea to get a set of sub frame connectors and control arms before you get into the high hp mods so you can actually put the power to the ground.

The list of mods is endless, you really need to get a good idea of where you want to go with it. ONce you know where you want to go you can ask specific questions to achieve youor goals. It's hard to recommend a tb or maf size if we don't know if you'll be running aftermarket heads cam or intake among other things. Anyway, I hope this helps, it's best to take it one area at a time and work toward a specific goal, saves you from buying the same parts several differen't times.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
loss of power suddenly	jimdrechsler	Windsor Power	17	09-30-2004 08:49 PM
power for 500 hp daily	Torinalth	Power Adders	22	09-25-2003 11:54 PM
Power for the Power Amp	traderguy	Audio, Security, & Electronics	2	07-13-2003 08:07 PM
power shift?	JamGtStang	Windsor Power	6	03-01-2001 02:11 PM
Electrical power, where to splice?	Chris_H	Windsor Power	3	02-11-2001 08:29 PM

04-01-2002, 12:36 AM	#4
chris91LX Registered Member Join Date: Oct 1998 Location: Suburban Chicago, Hanover Park Posts: 695	You should get a good idea of the diretion you want to go as far as performance. If this car is a daily driver it's going to make your choices a little differen't. I'd suggest going with headers and a cat back system as your first mods. Undeerdrive pullies would be a nice addition but i would highly recomend you go with a 130amp alternator as you live in a hot climate where you will need to use the A/C. An adjustable fuel pressure regulator will give you a few hp and really help with bigger mods int he future. After that if you plan on going with heads, cam and intake in the future I'd recomend you look at getting a throttle body and mass air sensor. It'd be a good idea to get a set of sub frame connectors and control arms before you get into the high hp mods so you can actually put the power to the ground. The list of mods is endless, you really need to get a good idea of where you want to go with it. ONce you know where you want to go you can ask specific questions to achieve youor goals. It's hard to recommend a tb or maf size if we don't know if you'll be running aftermarket heads cam or intake among other things. Anyway, I hope this helps, it's best to take it one area at a time and work toward a specific goal, saves you from buying the same parts several differen't times.