speedo gear pitch???

Kamaro Killer · 05-01-2002, 07:01 PM

I am looking to buy the 21 tooth gear for my speedo to tell the right speed, (3.73 gears). I went to a speedometer shop to buy the gear and they said they have to know whether it's a left or a right hand pitch. I have no idea what he was talking about, other than I needed a red 21 tooth gear. If anyone can enlighten me, I'd appreciate it. Or, better yet, if anyone knows of a part number from Summit, Jegs, etc.. or anywhere I could order it from, please let me know. Thanks!!

89 ATI · 05-01-2002, 08:25 PM

Go to the Ford dealer they should have it in stock. Less than ten bucks when I bought mine.

PKRWUD · 05-01-2002, 09:31 PM

The Ford part number for the gear you need is:

C4OZ-17271-A

Take care,
-Chris

Kamaro Killer · 05-02-2002, 12:01 PM

I went to Ford, and was told that they don't carry the part and cannot order it. The guy at the counter actually referred me to a local speedo shop. I'll try another Ford dealer and I'll go in with the part number in hand. Is there anything else I'll need other than just the 21 tooth gear? Thanks for the info!!!!!

05-01-2002, 07:01 PM	#1
Kamaro Killer Mustang Enthusiast Join Date: Mar 2002 Posts: 528	speedo gear pitch??? I am looking to buy the 21 tooth gear for my speedo to tell the right speed, (3.73 gears). I went to a speedometer shop to buy the gear and they said they have to know whether it's a left or a right hand pitch. I have no idea what he was talking about, other than I needed a red 21 tooth gear. If anyone can enlighten me, I'd appreciate it. Or, better yet, if anyone knows of a part number from Summit, Jegs, etc.. or anywhere I could order it from, please let me know. Thanks!! __________________ 1993 GT 5.0-My Stang Rice Hater's Club Member 22

05-01-2002, 08:25 PM	#2
89 ATI Registered Member Join Date: Sep 2000 Location: Lafayette, Indiana Posts: 120	Go to the Ford dealer they should have it in stock. Less than ten bucks when I bought mine. __________________ 89 GT convertible, Kenny Brown level 5, Edelbrock performer, AFR 165's, Comp cams XE270HR, C&L 76, 24# inj, Crane 1.7's, 70mm BBK throttle body 298.2 hp 328.2 tq Mustang dyno "Our lady of blessed acceleration don't fail me now" Elwood Blues

05-01-2002, 09:31 PM	#3
PKRWUD Junior Member Join Date: Mar 1999 Location: Ventura, California Posts: 8,981	The Ford part number for the gear you need is: C4OZ-17271-A Take care, -Chris __________________ Webmaster: Rice Haters Club Jim Porter Racing Peckerwoods Pit Stop Support Your Local RED & WHITE!

05-02-2002, 12:01 PM	#4
Kamaro Killer Mustang Enthusiast Join Date: Mar 2002 Posts: 528	Ford... I went to Ford, and was told that they don't carry the part and cannot order it. The guy at the counter actually referred me to a local speedo shop. I'll try another Ford dealer and I'll go in with the part number in hand. Is there anything else I'll need other than just the 21 tooth gear? Thanks for the info!!!!! __________________ 1993 GT 5.0-My Stang Rice Hater's Club Member 22

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Drive gear and speedo gear in a 95 T5	95GTS	Windsor Power	0	10-22-2003 08:50 AM
The Right Speedo Gear...	Titan	Modular Madness	8	09-23-2002 05:42 PM
speedo gear	redrider	Windsor Power	1	01-17-2002 10:06 PM
Speed compensator vs. Speedo gear?	5.0PiMpin	Windsor Power	4	01-13-2002 10:01 AM
Speedo Gear calculator - Where is it?	2FastLX	Windsor Power	1	05-08-2001 02:27 PM