MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar Mark Forums Read

Notices


 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old 10-20-2002, 11:06 PM   #12
jim_howard_pdx
Registered Member
 
jim_howard_pdx's Avatar
 
Join Date: Apr 2002
Location: Portland Oregon
Posts: 247
Cool

Byronech seems to have a good combo. I love those 331 strokers. I went with a 351 W because I love LONG RODS and that 5.95 rod really keeps the piston at TDC a good LONG time.

Someday I will put in a street fighter 427 stroker bottom end. With a solid roller cam of 275 duration 5.60 lift, it should make 525 HP and put me in the late 10's.

And LX guy, remember MY CAR is set up for cornering. If all I wanted to do was quarter, I would put my 9 second Fairlane with a monster 428 back on the track. 9.2 quarter miles at 134 MPH. And the heads would still qualify for super stock class racing, since I am using the original rockers on hardened moly shafts.
13 to 1 compression, LeMans Rods and it revs to 8,000 RPM without ANY issues.

So when you small block guys want to party, just remember with Nitrous, I am sitting at 8.56 ET's.

See you at the finish line.

Common LX guy...... Smile and enjoy life
And anyone that thinks the Police Interceptor 302 was basically stock has got some real issues. It had stronger rods, was factory balanced, has forged or hypereutectic pistons, high performance rings, and a hot cam. I know because I used to buy these. They were the first interceptor engine in the 80's and 90's to sustain 150 MPH on the highway. The Hemi 426 used to run 150's too, but at about 9 miles per gallon.

Now the Chevy police cruisers use the 370 HP Corvette engine which does 157-162. Pretty wicked rides.
__________________
1966 Customized for daily street and highway domination. 358 Windsor running 425 HP
C-4 Auto and 3.25 Posi
jim_howard_pdx is offline   Reply With Quote
 


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Power for the Power Amp traderguy Audio, Security, & Electronics 2 07-13-2003 08:07 PM
Lost top end power bobtodd Windsor Power 11 08-01-2002 10:28 PM
Power WIndow ?'s Coupe Devil Windsor Power 5 10-23-2001 03:12 PM
power shift? JamGtStang Windsor Power 6 03-01-2001 02:11 PM
Electrical power, where to splice? Chris_H Windsor Power 3 02-11-2001 08:29 PM


All times are GMT -5. The time now is 03:55 AM.


SEARCH