4cyl T5?

whoops · 10-30-2002, 10:27 AM

Hi All,
I'm looking for a donor car to convert my AOD to a T5 manual. I have an '89.

Do 4cyl cars with the 5 speed have the tranny I'm looking for, or do I need to find a 5.0L donor?

Thanks,
Justin

nickj8685 · 10-30-2002, 11:38 AM

No. That T-5 is weaker than the V8 T-5.

whoops · 10-30-2002, 11:40 AM

Dang. Thanks for the response. I'll keep looking I guess.

Justin

Coupe Devil · 10-30-2002, 12:23 PM

And the input shaft is a different length, between the two tranny's as well I believe.

Bradley

LX XLR8R · 10-30-2002, 02:25 PM

imput shafts the sam legnth just diffrent diameters..much weaker but has a awsome 1st gear

whoops · 10-30-2002, 02:27 PM

Thank you for the information all.

I'll continue to look around for a donor 5.0L T5

Justin

Conman · 10-30-2002, 03:36 PM

just some food for thought for you

5.0 T-5's are stonger than the 2.3 T-5's
now if you are planning on some horsepower modifications in the future you may want a tranny even stonger than the 5.0 T-5, perhaps a T-5 Z spec or a Tremec or something
Anyways, if you are thinking about something like that you can get the actual tranny from any number of places and use a 4 cyl as a donor for the pedal assembly and everything else you need.

4 cylinders are easier to find and even if you do find a 5.0 donor how good is the tranny? might be wore out and need a rebuild anyway

it's all up to you but this is just another suggestion

horsesnake95 · 10-30-2002, 03:50 PM

I've been told by someone who between he and his dad have over 50 years of working on fords that the only difference between the 4 and the 8 tranny is the first gear ratio and the smaller dia. input shaft bearing.... the 4 is no weaker than the 8

Conman · 10-30-2002, 11:03 PM

Ford rates the 2.3 t-5's at 240 ft-lbs
the 5.0 t-5's from 85-89 were rated at 265
the 5.0's from 90-93 were rated at 300 ft-lbs

for the 90-93's there was a higher nickel content in the gearset so the metal was actually stronger.

as for the 2.3's, I think they had the weaker alloy as well
Also a smaller shaft diameter would be weaker than the larger shaft although I don't think the shaft is the weakest part.
The higher gear ratio itself would also make the tranny weaker.
with the same input torque, the higher gear ratio would produce a higher output torque.

think about the gears in a rear end. It is alot easier to break the tires loose with 4.10's than it is with 2.73's, same thing with tranny gears except it's not just the tires breaking loose.

horsesnake95 · 10-30-2002, 11:09 PM

just a little known fact, the input shaft is the same dia. and length..... The only difference in dia. comes in at the very tip of the shaft where it slides into the input bearing which wouldn't make it any weaker.

Conman · 10-30-2002, 11:24 PM

that's why I said the shaft wasn't the limiting factor here

mustangII460 · 10-31-2002, 06:31 AM

4cyl shaft Dia 0.590 lenght 7.41
8cyl shaft Dia 0.668 lenght 7.15

LX XLR8R · 10-31-2002, 11:53 AM

Quote:

Originally posted by horsesnake95
just a little known fact, the input shaft is the same dia. and length..... The only difference in dia. comes in at the very tip of the shaft where it slides into the input bearing which wouldn't make it any weaker.

the "input shaft" is where it goes into the "input bearing"..the other part on the shaft is where the spline is for the clutch witch is the same on all of em

10-30-2002, 10:27 AM	#1
whoops Registered Member Join Date: Oct 2002 Location: Broomfield, Colorado Posts: 53	4cyl T5? Hi All, I'm looking for a donor car to convert my AOD to a T5 manual. I have an '89. Do 4cyl cars with the 5 speed have the tranny I'm looking for, or do I need to find a 5.0L donor? Thanks, Justin __________________ Justin '89 LX 5.0L AOD, notch back (STOLEN 11/21/02 at 4 am!)

10-30-2002, 11:40 AM	#3
whoops Registered Member Join Date: Oct 2002 Location: Broomfield, Colorado Posts: 53	Dang. Thanks for the response. I'll keep looking I guess. Justin __________________ Justin '89 LX 5.0L AOD, notch back (STOLEN 11/21/02 at 4 am!)

10-30-2002, 12:23 PM	#4
Coupe Devil Moderator Join Date: Mar 2001 Location: Myrtle Beach SC Posts: 1,643	And the input shaft is a different length, between the two tranny's as well I believe. Bradley __________________ 1990 GT, 347, TFS TW Heads, TFS Cam, TFS Track heat, Twin turbos, FMIC, T5. Built Ford Tough Moderator

10-30-2002, 02:25 PM	#5
LX XLR8R Dirk Diggler Join Date: Feb 1999 Location: SLOATSBURG, NY Posts: 1,931	imput shafts the sam legnth just diffrent diameters..much weaker but has a awsome 1st gear __________________ 95 undecided cubes, AFR 185s,undecided cam, undecided intake, and a 150 hit 89 "turbonotch" 2.3T You might want to hold on..i saw this on a cartoon once

10-30-2002, 02:27 PM	#6
whoops Registered Member Join Date: Oct 2002 Location: Broomfield, Colorado Posts: 53	Thank you for the information all. I'll continue to look around for a donor 5.0L T5 Justin __________________ Justin '89 LX 5.0L AOD, notch back (STOLEN 11/21/02 at 4 am!)

10-30-2002, 11:38 AM	#2
nickj8685 Registered Member Join Date: Jul 2002 Location: Russellville MO, where men are men and sheep are scared Posts: 66	No. That T-5 is weaker than the V8 T-5.

10-30-2002, 03:36 PM	#7
Conman Registered Member Join Date: Apr 2002 Location: Kingston, Ontario Posts: 351	just some food for thought for you 5.0 T-5's are stonger than the 2.3 T-5's now if you are planning on some horsepower modifications in the future you may want a tranny even stonger than the 5.0 T-5, perhaps a T-5 Z spec or a Tremec or something Anyways, if you are thinking about something like that you can get the actual tranny from any number of places and use a 4 cyl as a donor for the pedal assembly and everything else you need. 4 cylinders are easier to find and even if you do find a 5.0 donor how good is the tranny? might be wore out and need a rebuild anyway it's all up to you but this is just another suggestion __________________ '88 lx, Black on Black, check it out here Spent all my money on school, what a dumb mistake I'm old enough to know better, but still too young to care.

10-30-2002, 03:50 PM	#8
horsesnake95 Registered Member Join Date: Oct 2002 Location: illinois Posts: 26	I've been told by someone who between he and his dad have over 50 years of working on fords that the only difference between the 4 and the 8 tranny is the first gear ratio and the smaller dia. input shaft bearing.... the 4 is no weaker than the 8

10-30-2002, 11:03 PM	#9
Conman Registered Member Join Date: Apr 2002 Location: Kingston, Ontario Posts: 351	Ford rates the 2.3 t-5's at 240 ft-lbs the 5.0 t-5's from 85-89 were rated at 265 the 5.0's from 90-93 were rated at 300 ft-lbs for the 90-93's there was a higher nickel content in the gearset so the metal was actually stronger. as for the 2.3's, I think they had the weaker alloy as well Also a smaller shaft diameter would be weaker than the larger shaft although I don't think the shaft is the weakest part. The higher gear ratio itself would also make the tranny weaker. with the same input torque, the higher gear ratio would produce a higher output torque. think about the gears in a rear end. It is alot easier to break the tires loose with 4.10's than it is with 2.73's, same thing with tranny gears except it's not just the tires breaking loose. __________________ '88 lx, Black on Black, check it out here Spent all my money on school, what a dumb mistake I'm old enough to know better, but still too young to care.

10-30-2002, 11:09 PM	#10
horsesnake95 Registered Member Join Date: Oct 2002 Location: illinois Posts: 26	just a little known fact, the input shaft is the same dia. and length..... The only difference in dia. comes in at the very tip of the shaft where it slides into the input bearing which wouldn't make it any weaker.

10-30-2002, 11:24 PM	#11
Conman Registered Member Join Date: Apr 2002 Location: Kingston, Ontario Posts: 351	that's why I said the shaft wasn't the limiting factor here __________________ '88 lx, Black on Black, check it out here Spent all my money on school, what a dumb mistake I'm old enough to know better, but still too young to care.

10-31-2002, 06:31 AM	#12
mustangII460 Factoy Five Roadster Join Date: May 2000 Location: Sevier Co,Tennessee Posts: 1,681	4cyl shaft Dia 0.590 lenght 7.41 8cyl shaft Dia 0.668 lenght 7.15 __________________ Frank

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
T-5 Dead Change to 4cyl Tranny??	raptor	Windsor Power	5	06-18-2003 03:08 AM
4cyl. T-5 transmission HELP	crazyhumpyd	Windsor Power	6	04-27-2002 10:08 PM
Do You Have 4cyl Springs On Your 5.0? If So, Please Help Me With Some Questions.	BowTie Eater 5 Liter	Windsor Power	2	04-01-2002 10:40 AM
Converted 4cyl to 5.0 emissions question	BoveK	Windsor Power	0	02-02-2002 10:14 AM
Installing 5.0 in a 4cyl frame	pxcr_600	Windsor Power	6	11-19-2001 02:39 PM