Removing smog will do what?

LX XLR8R · 07-23-2001, 02:58 PM

well it you basically want to get big enuff injectors so you dont have to run high FP..i would go with 36# injectors..at least 30#..i mean are you ganna try to get this thing in the high 10's or are you ganna just drive it on the street..cuz that combo will b capable of some sick time once its tuned..i would suggest a custom burnt chip after said and done..i would also go with a Pro-m 80mm mass air meter..
and as far as TB it depends how high your ganna rev it..i mean with the cam you have in it i would suggest a 70mm..but if you get a big cam go 75mm
then depending on the rod ratio of the 347 you built will determain how high you can rev it safley..

------------------
1987 black notch(ex 4 banger)
DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one..
AIM=onesillynotch

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Edel. non-smog to AFR smog legal heads? What do you guys think?	Simi Stang	Windsor Power	10	06-19-2003 11:14 PM
smog question!!!	Notchback5.0L	Windsor Power	0	06-03-2003 06:51 PM
Question about removing smog equipment	skiwesser	Windsor Power	4	11-17-2002 03:19 PM
Whats all involved in removing the smog pump from a 91 gt?	4.6l-eatr	Windsor Power	4	02-20-2002 09:11 PM
Removing Smog Pump make much HP Diff?	ALS85GT	Windsor Power	4	01-22-2002 04:12 PM

07-23-2001, 02:58 PM	#1
LX XLR8R Dirk Diggler Join Date: Feb 1999 Location: SLOATSBURG, NY Posts: 1,931	well it you basically want to get big enuff injectors so you dont have to run high FP..i would go with 36# injectors..at least 30#..i mean are you ganna try to get this thing in the high 10's or are you ganna just drive it on the street..cuz that combo will b capable of some sick time once its tuned..i would suggest a custom burnt chip after said and done..i would also go with a Pro-m 80mm mass air meter.. and as far as TB it depends how high your ganna rev it..i mean with the cam you have in it i would suggest a 70mm..but if you get a big cam go 75mm then depending on the rod ratio of the 347 you built will determain how high you can rev it safley.. ------------------ 1987 black notch(ex 4 banger) DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one.. AIM=onesillynotch