100 K Mile Stang

Smokedawg · 07-27-2001, 08:00 AM

I think the 30# injectors might be a bit to much for those few of things you mentioned.
Is it a 5-speed or auto? If its a 5speed I would go with a set of 3.73 gears. If its an auto go with 4.10.
Then go with some headers and a h-pipe, then some type of mufflers. Then get a MAF and a bigger TB, I think a 75mm like you mentioned might also be a bit big for the limited amount items you listed. So go with a 65mm or 70mm. Dont forget underdrive pulleys. Then after you get some more money saved up, go after a intake and a set of heads.

------------------
347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC and Smog del, rear seat del.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
raced a Supra Twin Turbo	Stang35th	Stang Stories	63	08-23-2003 12:36 AM
q/8 mile racing, $15 bucks as many runs as you want!!!	hillie16	Ford Show & Go	1	09-05-2001 08:39 AM
finally broke into the 7`s 1/8 mile	hippi97	Windsor Power	5	06-25-2001 03:22 PM
new 1/8 mile times	hippi97	Windsor Power	1	05-06-2001 06:32 AM

07-27-2001, 08:00 AM	#5
Smokedawg Tires Fear Me... Join Date: Jan 2001 Posts: 867	I think the 30# injectors might be a bit to much for those few of things you mentioned. Is it a 5-speed or auto? If its a 5speed I would go with a set of 3.73 gears. If its an auto go with 4.10. Then go with some headers and a h-pipe, then some type of mufflers. Then get a MAF and a bigger TB, I think a 75mm like you mentioned might also be a bit big for the limited amount items you listed. So go with a 65mm or 70mm. Dont forget underdrive pulleys. Then after you get some more money saved up, go after a intake and a set of heads. ------------------ 347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC and Smog del, rear seat del.