351 from a bronco

StateTroopCoupe · 01-13-2004, 08:13 AM

I have a stock 88 5.0 Would it be possible to take a 351 from a bronco, put my stock heads, inake and exhaust on it. What else would I have to do what problems would i run into? Is it worth it to do? Will my 5 speed trany bolt on?
Thanks for any help

420nitro · 01-13-2004, 10:25 AM

Quote:

Originally posted by StateTroopCoupe
I have a stock 88 5.0 Would it be possible to take a 351 from a bronco, put my stock heads, inake and exhaust on it. What else would I have to do what problems would i run into? Is it worth it to do? Will my 5 speed trany bolt on?
Thanks for any help

\

No, or at least you can't bolt on your intake and headers. The 351 has a taller deck and the block is wider. You can bolt on your 302 heads after you bore out the holes from 7/16 to 1/2 but why?
You can bolt in the complete 351 into your Mustang though

There will be some work involved to get this done.

flyin 5.8 · 01-14-2004, 07:36 PM

Full length 5.0 headers will bolt on but most likely will also hit the firewall or floor. Shorty headers might work with a new (custom?)H pipe.

01-13-2004, 08:13 AM	#1
StateTroopCoupe Registered Member Join Date: Sep 2003 Location: Long Island Posts: 16	351 from a bronco I have a stock 88 5.0 Would it be possible to take a 351 from a bronco, put my stock heads, inake and exhaust on it. What else would I have to do what problems would i run into? Is it worth it to do? Will my 5 speed trany bolt on? Thanks for any help

01-14-2004, 07:36 PM	#3
flyin 5.8 Registered Member Join Date: Apr 2002 Location: Holland, Michigan Posts: 73	Full length 5.0 headers will bolt on but most likely will also hit the firewall or floor. Shorty headers might work with a new (custom?)H pipe. __________________ If girls are made of sugar and spice, how come they taste like tuna? "Nitrous is like a hot chick with an STD . . . you want to hit it, but your afraid of the consequences."

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
'94 Ford Bronco	Simi Stang	Built Ford Tough	9	01-14-2005 12:35 AM
'76 302 Bronco engine questions	QuantumMotorsports	Windsor Power	1	05-05-2003 12:32 AM
'94 Ford Bronco starting problems	Simi Stang	Built Ford Tough	5	01-17-2003 08:53 PM
80' Bronco	NewAge 5.0	Built Ford Tough	4	11-27-2002 12:45 PM
Daily driven '83 Bronco 4x4 needs more power	Nitrous Al	Built Ford Tough	5	03-06-2001 03:10 AM