Good budget pistons/ rebuild kit????

Dark_5.0 · 11-11-2004, 10:50 AM

My heads have 58cc combustion chambers and 2.02 1.60 valves.

I was looking at some Wiseco pistons on ebay but didnt know if they were any good. They were 10 to 1 with valve reliefs that could accomidate .600 lift with 2.02 1.60 valves.

What ring kit do you reccomend?

andy669 · 11-11-2004, 06:40 PM

I like a .043 plasma moly top, .043 Napier Total seal second, (gapped) 3mm Sealed power low tension oil ring, for a NA motor. If you plan to run nitrous or a blower later on, they would change.

Andy

Dark_5.0 · 11-12-2004, 09:55 AM

You have been alot of help. Thanks,

11-11-2004, 10:50 AM	#1
Dark_5.0 Registered Member Join Date: Apr 2001 Location: Staging lane Posts: 4,337	Re: Good budget pistons/ rebuild kit???? My heads have 58cc combustion chambers and 2.02 1.60 valves. I was looking at some Wiseco pistons on ebay but didnt know if they were any good. They were 10 to 1 with valve reliefs that could accomidate .600 lift with 2.02 1.60 valves. What ring kit do you reccomend? __________________ 92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer

11-11-2004, 06:40 PM	#2
andy669 Registered Member Join Date: Jan 2001 Location: Moline Il Posts: 901	Re: Good budget pistons/ rebuild kit???? I like a .043 plasma moly top, .043 Napier Total seal second, (gapped) 3mm Sealed power low tension oil ring, for a NA motor. If you plan to run nitrous or a blower later on, they would change. Andy __________________ 88 coupe 91 LX NMRA Pure Street 5120

11-12-2004, 09:55 AM	#3
Dark_5.0 Registered Member Join Date: Apr 2001 Location: Staging lane Posts: 4,337	Re: Good budget pistons/ rebuild kit???? You have been alot of help. Thanks, __________________ 92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Budget 302 (I mean budget)	BLOCKER	Windsor Power	4	08-12-2004 04:40 AM
Bradenton: Bad News, Good News And a Compliment!	lx mike	Stang Stories	5	04-07-2003 10:14 AM
I need a good 4 or 6 point roll bar. What's a good company?	tireburner163	Blue Oval Lounge	18	02-16-2003 01:36 PM
66 Stang rebuild	Dster20	Classic Mustangs	5	11-04-2001 08:23 PM
66 Engine Rebuild	mustangbob19	Classic Mustangs	2	07-16-2001 06:05 PM