'65 Fastback Rear Seat Installation

Sbattles · 11-29-2004, 08:05 PM

Ok, there's 3 panels for the rear seat. Moving from the front seats towards the trunk, the first panel is a 90 degree angle. The second panel ends up being the seat back when in the up position. The third panel is stationary. It's the closest to the trunk. That's the one I'm trying to figure out how to install.

I see on the bottom of this panel various bolt holes as well as having two thin strips of metal (look like sheet metal maybe 2" wide x 4" long). These look like they slip under something in the floor? Maybe I'm missing some brakets?

I'm just trying to figure out how this panel attaches to the body. Right now all she's doing is floating.

Any help is appreciated.

rwhite65 · 11-30-2004, 02:45 AM

ok, it has been a few years since i have had mine out, but we will get you thru it. I was thinking the metal tabs slid under brackets that was welded to the floor....and that the tabs were threaded(slightly)? Is there any holes in your tabs?
Ryan

11-29-2004, 08:05 PM	#1
Sbattles Registered Member Join Date: Nov 2004 Posts: 3	Re: '65 Fastback Rear Seat Installation Ok, there's 3 panels for the rear seat. Moving from the front seats towards the trunk, the first panel is a 90 degree angle. The second panel ends up being the seat back when in the up position. The third panel is stationary. It's the closest to the trunk. That's the one I'm trying to figure out how to install. I see on the bottom of this panel various bolt holes as well as having two thin strips of metal (look like sheet metal maybe 2" wide x 4" long). These look like they slip under something in the floor? Maybe I'm missing some brakets? I'm just trying to figure out how this panel attaches to the body. Right now all she's doing is floating. Any help is appreciated.

11-30-2004, 02:45 AM	#2
rwhite65 Ride Hard Join Date: Oct 2000 Location: Wyoming IL Posts: 1,094	Re: '65 Fastback Rear Seat Installation ok, it has been a few years since i have had mine out, but we will get you thru it. I was thinking the metal tabs slid under brackets that was welded to the floor....and that the tabs were threaded(slightly)? Is there any holes in your tabs? Ryan __________________ 65 Fastback 91 roller 306, H/C/I AOD-Bauman, PI Stallion, 4.10's and traction loc 04 Grand Cherokee Freedom Edition 79 Ford F-250 4x4 - Restored

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rear Seat Mounted CD	mleboeuf	Audio, Security, & Electronics	2	02-09-2003 10:55 AM
How to remove rear seat in 01' Mustang GT???????	wickedgt	Modular Madness	4	03-30-2002 11:40 AM
Deleting Rear Seat	Smokedawg	Windsor Power	8	04-21-2001 02:14 PM
rear seat removal	93lx	Blue Oval Lounge	1	01-14-2001 06:59 PM