Will 28x10.5" ET Streets Fit My 88 GT Without Rubbibg?

[Rick 91GT]

They will kill your rpm, you don't have enough gear or power to run those tires yet, the 26" x 10.5" would be best. The 28" tires will fit if you trim the wheel opening and bang the inner fender in, you may also need to trim the rear ground effect so that when the tires grow they do not rub.

------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension, SPEC stage III clutch, Lakewood SFI bell, S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon!
[b]12.16 @ 113.5, 1.78 60ft..no traction in the 90 degree