Gas smell with AN hose

PKRWUD · 11-26-2005, 05:32 AM

AN is a type of fitting. It can be used with many types of hose and metal lines. AN fittings offer the best seal, so I doubt the fittings had anything to do with it, but it's possible that the hose is faulty. What type of fuel lines/hose are you using? As mentioned, if you added a vent to your tank/cell, that will definitely add a nice, gasoline aroma to your garage. Leaving the air cleaner off of your carb can add to it as well, but it wouldn't create an odor where there wasn't one before.

82 GT · 11-26-2005, 10:55 AM

I'm using all Earl's plumbing. I have the stock fuel tank and pinched off the old pick up tube.
I just figured that maybe fuel fumes will permeate through the braided steel and rubber hoses.

Stang_ROTY · 11-28-2005, 04:06 PM

I'm using all AN fittings and steel braided line in my setup. I never have any odor for what it's worth. Of course, I'm using an EFI setup so naturally I wouldn't have any odor near the engine bay unless I had problems. Good luck.

11-26-2005, 05:32 AM	#1
PKRWUD Junior Member Join Date: Mar 1999 Location: Ventura, California Posts: 8,981	Re: Gas smell with AN hose AN is a type of fitting. It can be used with many types of hose and metal lines. AN fittings offer the best seal, so I doubt the fittings had anything to do with it, but it's possible that the hose is faulty. What type of fuel lines/hose are you using? As mentioned, if you added a vent to your tank/cell, that will definitely add a nice, gasoline aroma to your garage. Leaving the air cleaner off of your carb can add to it as well, but it wouldn't create an odor where there wasn't one before. __________________ Webmaster: Rice Haters Club Jim Porter Racing Peckerwoods Pit Stop Support Your Local RED & WHITE!

11-26-2005, 10:55 AM	#2
82 GT Import Slayer Join Date: May 1999 Posts: 2,241	Re: Gas smell with AN hose I'm using all Earl's plumbing. I have the stock fuel tank and pinched off the old pick up tube. I just figured that maybe fuel fumes will permeate through the braided steel and rubber hoses. __________________ '82 GT 351W (.060)Comp Cams 274* Extreme Energy cam, ported & polished heads w/ 1.94/1.60 valves 10.3:1 flat top pistons,stealth intake, Mallory dizzy,Holley 750dp carb, BBK shorties,Flowmaster exhaust,C-4 with 3700 stall converter, B&M pro shifter,8.8 rear, 4:10's, subframes, electric fan, powermaster alternator, 4 core radiator.

11-28-2005, 04:06 PM	#3
Stang_ROTY Registered Member Join Date: Feb 2001 Location: Berkshire County - Massachusetts Posts: 735	Re: Gas smell with AN hose I'm using all AN fittings and steel braided line in my setup. I never have any odor for what it's worth. Of course, I'm using an EFI setup so naturally I wouldn't have any odor near the engine bay unless I had problems. Good luck. __________________ Red 1993 GT Street Machine Best E.T. - 12.41/Best MPH = 108 Engine is a 1969 351 block w/393 stroker kit. Dynamic Roller Myte C4, 8 pt cage. Edlebrock Performer heads and Victor Jr. EFI, FRPP 30lb injectors & Cartech fuel system. MSD ignition. Sothside Machine bars & Sub-frames, adj. upper's, 3.73's, Koni rear shocks, much more

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hose Kits	hbomb	Appearance & Detailing	2	10-18-2005 08:30 AM
Oil Burning Smell	TMASTER	Windsor Power	2	12-08-2004 06:20 PM
Power Steering Hose	diablopony	Classic Mustangs	4	01-12-2003 10:17 AM
P/S bracket and hose	mike34cpe	Classic Mustangs	0	11-04-2002 08:58 PM
My clothes smell like gas	Just me	Windsor Power	5	01-05-2001 02:45 PM