Threaded Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
05-16-2006, 10:02 PM
|
#2 |
|
I'd rather be basketweaving
Join Date: Feb 2000
Location: Indianapolis
Posts: 2,551
|
Re: I need help
Jason, read through this article http://www.mustangcentral.net/tech/alternator.html
It is for an EFI one, but should help out a bit. If I remember correctly, the small wire from that plug is jumped over to the spade connector, then the other 2 wires are actually just 2 10ga wires that get tied together. The article says they go to the solenoid, but also has a fuseable link inline. http://www.fordmuscle.com/archives/2...e/index2.shtml thats another good article. If you don't have those wires, you should have stuck with EFI! lol good luck -Drew
__________________
NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft |
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|