Educated guess on 1/8th mile time!!!

USMC302 · 03-01-2007, 04:39 PM

What was your MPH and 60ft on the stock pass?

1987StangL268X · 03-01-2007, 05:49 PM

1.83 60 ft. and best mph was kinda down @ 77.99 but look at that 60 on a stock motor.....no mods!!

1987StangL268X · 03-08-2007, 11:52 PM

Come on guys!!!!what do you think????!!!!

USMC302 · 03-09-2007, 11:11 AM

I'd say 7.9's or 8.0's. Good luck. i'm also going to the 1/8 track tonight, looking for 7.6 or better.

Rev · 03-09-2007, 08:21 PM

I'm gonna guess 8.2 sec. @ 85 mph.

Rev

1987StangL268X · 03-09-2007, 11:29 PM

Thanks guys! thats about what i was thinking. Not a bad setup for an 18 year old thats done all the work by hisself and paid for it all at the same time!!

USMC302 · 03-10-2007, 01:58 PM

I went 7.601@92.2 last night, had to launch very low RPM to hook, crappy track. That converts to a 11.86@116. Got some more work to do but I think if I could have launched at 6000 like normal the 60ft's could have come down and times would have been better

03-01-2007, 04:39 PM	#1
USMC302 Registered Member Join Date: Apr 2001 Location: Gallatin, Tn Posts: 1,326	Re: Educated guess on 1/8th mile time!!! What was your MPH and 60ft on the stock pass? __________________

03-01-2007, 05:49 PM	#2
1987StangL268X Registered Member Join Date: Feb 2007 Location: Tennessee Posts: 38	Re: Educated guess on 1/8th mile time!!! 1.83 60 ft. and best mph was kinda down @ 77.99 but look at that 60 on a stock motor.....no mods!!

03-08-2007, 11:52 PM	#3
1987StangL268X Registered Member Join Date: Feb 2007 Location: Tennessee Posts: 38	Re: Educated guess on 1/8th mile time!!! Come on guys!!!!what do you think????!!!! __________________ 1987 mustang hatchback. weld wheels, driveshaft loop, subframe connectors,308 w/ 520 lift cam, edelbrock perf rpm alum heads 2.02 1.60 valves, 1.6 roller rockers, edelbrock air gap performer intake, roller lifters, 625 vac secondary demon, c-4 trans w 3,000 stall, 3.73 gears

03-09-2007, 11:11 AM	#4
USMC302 Registered Member Join Date: Apr 2001 Location: Gallatin, Tn Posts: 1,326	Re: Educated guess on 1/8th mile time!!! I'd say 7.9's or 8.0's. Good luck. i'm also going to the 1/8 track tonight, looking for 7.6 or better. __________________

03-09-2007, 08:21 PM	#5
Rev Registered Member Join Date: Nov 1998 Location: Houston, Tx. Posts: 3,887	Re: Educated guess on 1/8th mile time!!! I'm gonna guess 8.2 sec. @ 85 mph. Rev __________________ '66 Coupe, 306, 350-375 HP, C-4, 13.07 e.t., 104.8 mph, 1/4 mi. O.B.C. #2 '66 coupe

03-09-2007, 11:29 PM	#6
1987StangL268X Registered Member Join Date: Feb 2007 Location: Tennessee Posts: 38	Re: Educated guess on 1/8th mile time!!! Thanks guys! thats about what i was thinking. Not a bad setup for an 18 year old thats done all the work by hisself and paid for it all at the same time!! __________________ 1987 mustang hatchback. weld wheels, driveshaft loop, subframe connectors,308 w/ 520 lift cam, edelbrock perf rpm alum heads 2.02 1.60 valves, 1.6 roller rockers, edelbrock air gap performer intake, roller lifters, 625 vac secondary demon, c-4 trans w 3,000 stall, 3.73 gears

03-10-2007, 01:58 PM	#7
USMC302 Registered Member Join Date: Apr 2001 Location: Gallatin, Tn Posts: 1,326	Re: Educated guess on 1/8th mile time!!! I went 7.601@92.2 last night, had to launch very low RPM to hook, crappy track. That converts to a 11.86@116. Got some more work to do but I think if I could have launched at 6000 like normal the 60ft's could have come down and times would have been better __________________

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1985 GT - Test your mustang knowledge, guess how fast i'll run 1/4 mile	84LX89GT	Blue Oval Lounge	64	11-09-2023 09:10 PM
1998 Cobra - Test your mustang knowledge, guess how fast i'll run 1/4 mile	84LX89GT	Blue Oval Lounge	20	07-31-2017 04:27 PM
Guess I'll be spending some more time in Mod Madness	95mustanggt	Blue Oval Lounge	5	01-29-2003 08:47 PM
1/4 mile time??	'89GTStang	Windsor Power	5	10-06-2002 05:15 PM
NEED A GUESS ON 1/4 MILE TIMES PLEASE	joey50gt	Windsor Power	8	06-17-2001 12:41 PM