351w power

[Stang_Gang]

Originally Posted by bad289

You better get rid of the chevy rockers! I tried this once and could not get rocker geometry correct without some weird pushrod length. Got ford rockers and with off the shelf pushrods everything fell in place.

cant i already tried ford rockers. they dont work on chevy valves. the chevy stems are shorter then the fords, so the ford rockers run on the top of the spring perch instead of the stem which can cause the keepers to come out and drop a valve down in the cylinder. i got very lucky and had only one keeper come out and found it on top of the head, so i had to go back and change all the keepers, spring perches and push rods because it ate some of them up so i changed them all.

[Stang_Gang]

here are a few more pictures for your enjoyment

1 new motor tring to see if the hood will clear.
2 no it didnt but had a 04 gt scoop laying around so all is good
3 original 4bbl 302
4 new 351w

[kpro86]

my guess would be about 300-325hp and about 375-400tq.