Fuel Pump Install

[Rick 91GT]

That pump should have come with the clips..one is like the fuel filter and one is round. You usually can find these at a local parts store, just take the old ones with you. Make sure you use a brass punch so iy will not spark when you are taking the washer off the top of the tank, and unplug the battery.

I read you other thread and although it sounds pricey I paid $1 for the hood prop rod clip so I can believe it was $4.75.

------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension, SPEC stage III clutch, Lakewood SFI bell, S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon!
[b]12.16 @ 113.5, 1.78 60ft..no traction in the 90 degree