Vibration Problem

Phantom5oh · 02-05-2003, 12:37 PM

On my 95 GTS I noticed a funny vibration the other day. It seems to be more prominent under load. At first I thought it was my passenger side front tire, being out of balance, but in addition to being more noticeable under load I feel it more in second gear (hard acceleration) and between 55-65 MPH cruising. I started noticing it in the steering wheel this morning too. I haven't a clue what it might be, anyone have any ideas?

cyberstang5.0 · 02-05-2003, 01:22 PM

Is it consistent with going 55mph ?

Yes: something to do with suspension (tire balance, front end alingment, bent rim)

No: It might be the torque converter. My mom's went out in her 95 T-bird (4.6L) and my GF's is starting to go out in her 95 stang (3.8L). I think there is something worng with the torque converter installed on the 95's.

Phantom5oh · 02-05-2003, 01:43 PM

Its a 5 speed so it's definately not a torque converter problem.

Between 55-65 MPH it seems pretty consistent. Thats what is throwing me off. If it was a tire or rim wouldn't it increase with speed?

WADS56 · 02-05-2003, 01:54 PM

Quote:

Originally posted by Phantom5oh
Its a 5 speed so it's definately not a torque converter problem.

Between 55-65 MPH it seems pretty consistent. Thats what is throwing me off. If it was a tire or rim wouldn't it increase with speed?

Not all the time. When a tire is just out of ballence a little you will notice it during a certin speed.

Phantom5oh · 02-05-2003, 02:58 PM

OK, I'll switch to my "summer" rims and tires next time its nice enough out.

What about the vibration I feel in second gear only under acceleration? Could it be my clutch slipping or something like that? Wouldn't I notice that more in a higher gear when I hammer on it?

cyberstang5.0 · 02-05-2003, 08:25 PM

Quote:

Originally posted by Phantom5oh
Its a 5 speed

Oh, my bad... you didn't say that.

gtsr515 · 02-05-2003, 10:32 PM

How about warped brake rotors or bad bearings

Jay

Phantom5oh · 02-05-2003, 10:32 PM

Sorry cyberstang5.0, I forgot to mention that.

On my way home from work tonight I paid close attention of the vibration. While I was stuck going slow in traffic I noticed that my shifter was vibrating a lot. So when traffic got going again I held my hand on it and it made the tips of my fingers itch. Between 20-35 MPH and 55-65 MPH it vibrated a lot. The faster I went the more it vibrated all the way up to 95 MPH. Thats where I figured out that my driveshaft U-Joints must be gone. Is my logic correct or am I way off?

ex-lt1-guy · 02-05-2003, 10:43 PM

my u joint went out on my 5 speed and it shook the shifter viloently, well one of the caps was missing haha, yours might not be as bad.....yet, get under there and wiggle them see if they are tight, probably part of the problem

cyberstang5.0 · 02-06-2003, 07:36 AM

Yep, that's the problem! Get a FMS Alunium drive shaft. I have one and it's really nice. It's an easy install

Phantom5oh · 02-06-2003, 08:42 AM

How much do they go for? I checked Summit, and I couldn't find it. I could have sworn that I saw it in the last issue they sent me.

cyberstang5.0 · 02-06-2003, 09:45 AM

Quote:

Originally posted by Phantom5oh
How much do they go for? I checked Summit, and I couldn't find it. I could have sworn that I saw it in the last issue they sent me.

Here's the info...
Summit Part Number : FMS-M4602G ($159.95)
Jeg's Part Number : 397-M-4602-G ($159.99)

Phantom5oh · 02-06-2003, 10:18 AM

Hey cyberstang5.0 thanks for the help. I knew it was in there somewhere! Hopefully that cures my problem.

02-05-2003, 12:37 PM	#1
Phantom5oh Registered Member Join Date: Mar 2000 Location: Boston, MA Posts: 334	Vibration Problem On my 95 GTS I noticed a funny vibration the other day. It seems to be more prominent under load. At first I thought it was my passenger side front tire, being out of balance, but in addition to being more noticeable under load I feel it more in second gear (hard acceleration) and between 55-65 MPH cruising. I started noticing it in the steering wheel this morning too. I haven't a clue what it might be, anyone have any ideas? __________________ 95 GTS 03 DR 650SE Sgarzi's Machine Works

02-05-2003, 01:43 PM	#3
Phantom5oh Registered Member Join Date: Mar 2000 Location: Boston, MA Posts: 334	Its a 5 speed so it's definately not a torque converter problem. Between 55-65 MPH it seems pretty consistent. Thats what is throwing me off. If it was a tire or rim wouldn't it increase with speed? __________________ 95 GTS 03 DR 650SE Sgarzi's Machine Works

02-05-2003, 02:58 PM	#5
Phantom5oh Registered Member Join Date: Mar 2000 Location: Boston, MA Posts: 334	OK, I'll switch to my "summer" rims and tires next time its nice enough out. What about the vibration I feel in second gear only under acceleration? Could it be my clutch slipping or something like that? Wouldn't I notice that more in a higher gear when I hammer on it? __________________ 95 GTS 03 DR 650SE Sgarzi's Machine Works

02-05-2003, 10:32 PM	#7
gtsr515 Registered Member Join Date: Nov 2001 Location: Sunny, Hot, Sebring, Florida Posts: 725	vibration How about warped brake rotors or bad bearings Jay __________________ Remember...2nd place is 1st place for losers!

02-05-2003, 10:32 PM	#8
Phantom5oh Registered Member Join Date: Mar 2000 Location: Boston, MA Posts: 334	Sorry cyberstang5.0, I forgot to mention that. On my way home from work tonight I paid close attention of the vibration. While I was stuck going slow in traffic I noticed that my shifter was vibrating a lot. So when traffic got going again I held my hand on it and it made the tips of my fingers itch. Between 20-35 MPH and 55-65 MPH it vibrated a lot. The faster I went the more it vibrated all the way up to 95 MPH. Thats where I figured out that my driveshaft U-Joints must be gone. Is my logic correct or am I way off? __________________ 95 GTS 03 DR 650SE Sgarzi's Machine Works

02-05-2003, 01:22 PM	#2
cyberstang5.0 347ci of HORSE POWER!!! Join Date: Jul 2001 Location: Houston, TX Posts: 1,416	Is it consistent with going 55mph ? Yes: something to do with suspension (tire balance, front end alingment, bent rim) No: It might be the torque converter. My mom's went out in her 95 T-bird (4.6L) and my GF's is starting to go out in her 95 stang (3.8L). I think there is something worng with the torque converter installed on the 95's.

02-05-2003, 10:43 PM	#9
ex-lt1-guy Registered Member Join Date: Dec 2001 Location: O'Fallon IL Posts: 93	my u joint went out on my 5 speed and it shook the shifter viloently, well one of the caps was missing haha, yours might not be as bad.....yet, get under there and wiggle them see if they are tight, probably part of the problem

02-06-2003, 07:36 AM	#10
cyberstang5.0 347ci of HORSE POWER!!! Join Date: Jul 2001 Location: Houston, TX Posts: 1,416	Yep, that's the problem! Get a FMS Alunium drive shaft. I have one and it's really nice. It's an easy install

02-06-2003, 08:42 AM	#11
Phantom5oh Registered Member Join Date: Mar 2000 Location: Boston, MA Posts: 334	How much do they go for? I checked Summit, and I couldn't find it. I could have sworn that I saw it in the last issue they sent me. __________________ 95 GTS 03 DR 650SE Sgarzi's Machine Works

02-06-2003, 10:18 AM	#13
Phantom5oh Registered Member Join Date: Mar 2000 Location: Boston, MA Posts: 334	Hey cyberstang5.0 thanks for the help. I knew it was in there somewhere! Hopefully that cures my problem. __________________ 95 GTS 03 DR 650SE Sgarzi's Machine Works

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
vibration problem	KHC	Windsor Power	5	09-10-2004 05:12 AM
Help! vibration problem!!	skiwesser	Windsor Power	14	06-28-2004 01:41 AM
follow up to horrible vibration problem	Toeclicker	Windsor Power	4	12-18-2003 06:38 PM
Vibration Problem	RDMumfts Stang	Windsor Power	10	03-23-2003 07:04 PM
Think i found problem, vibration, and knocking noise??	90dpscoupe	Windsor Power	2	10-14-2001 12:46 AM