How much is the average header install from a shop???

96_4.6 · 10-02-2003, 08:38 PM

Just wonderin, I'm getting some shorty headers for my 96 gt and its a direct replacement to the H-pipe I have so I'm hoping its not too much for an install. I should go longtubes but cant afford the new mid-pipe and stuff I'm lookin for some extra ponies with these headers with my flows and high-flow H-pipe and stuff, thanks!!!!

GodStang · 10-03-2003, 07:19 AM

Depends on the car and what area of the country. Had a buddy here with a 98 Cobra and they wanted $900. I know a GT and Cobra are different but this is the best I can tell ya. When I put my headers on my Cobra I am doing myself. Best of Luck and post some sound clips if you can.

Hethj7 · 10-03-2003, 10:36 AM

Quote:

Originally posted by GodStang
Depends on the car and what area of the country. Had a buddy here with a 98 Cobra and they wanted $900. I know a GT and Cobra are different but this is the best I can tell ya. When I put my headers on my Cobra I am doing myself. Best of Luck and post some sound clips if you can.

$900! Wow! I knew it wouldn't be a cheap job, but I would have never expected it to be near that much.

96_4.6 - Just call around to a few shops and start getting quotes. Most will do that over the phone.

Red Mustang Gt 46 · 10-04-2003, 09:41 AM

Thats about right $800-$900 for the 4.6...ridiculous!

Rev · 10-04-2003, 02:52 PM

I think you can get decent work for $50/hr. I wouldn't expect more than 4-5 hrs. if everything fits. Of course new gaskets, donuts, etc. are extra parts.

Rev

10-02-2003, 08:38 PM	#1
96_4.6 Registered Member Join Date: Jul 2002 Location: Michigan Posts: 417	How much is the average header install from a shop??? Just wonderin, I'm getting some shorty headers for my 96 gt and its a direct replacement to the H-pipe I have so I'm hoping its not too much for an install. I should go longtubes but cant afford the new mid-pipe and stuff I'm lookin for some extra ponies with these headers with my flows and high-flow H-pipe and stuff, thanks!!!! __________________ 1996 Mustang GT, AODE -Trickflow Upper Plenum -BBK 70mm Throttlebody -02 PI Lower Intake -March Pulleys -BBK H-Pipe -2 Chamber Flowmaster mufflers -3000 RPM Stall -JLT CAI with special K&N -MSD Supercondutor wires -180 stat -FRPP 4:10's *FOR SALE C&L TRUE FLOW INLET PIPE WITH K&N* My Stang

10-03-2003, 07:19 AM	#2
GodStang College Stanger Join Date: May 1999 Location: Aiken,south carolina, usa Posts: 1,097	Depends on the car and what area of the country. Had a buddy here with a 98 Cobra and they wanted $900. I know a GT and Cobra are different but this is the best I can tell ya. When I put my headers on my Cobra I am doing myself. Best of Luck and post some sound clips if you can. __________________ 2003 Sonic Blue Cobra

10-04-2003, 09:41 AM	#4
Red Mustang Gt 46 13.3 @ 103 Join Date: May 2001 Location: Maryland Posts: 253	Thats about right $800-$900 for the 4.6...ridiculous! __________________ Equipment by: Steeda C&L COMP CAMS FRPP MSD Bassani Magnaflow MAC

10-04-2003, 02:52 PM	#5
Rev Registered Member Join Date: Nov 1998 Location: Houston, Tx. Posts: 3,887	$50/hr I think you can get decent work for $50/hr. I wouldn't expect more than 4-5 hrs. if everything fits. Of course new gaskets, donuts, etc. are extra parts. Rev __________________ '66 Coupe, 306, 350-375 HP, C-4, 13.07 e.t., 104.8 mph, 1/4 mi. O.B.C. #2 '66 coupe

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1 3/4 long tube header install.	Dark_5.0	Windsor Power	1	08-05-2004 01:51 PM
How Long does it actually take for a shorty header install that fits like OEM?	96_4.6	Modular Madness	6	12-15-2003 12:17 AM
Quick question, how much did you pay for your H-pipe install from a shop?	96_4.6	Blue Oval Lounge	5	08-02-2002 12:17 AM
Shorty header install questions??	86StangGT	Windsor Power	4	12-11-2001 10:40 AM
Header Install	DemonGT	Windsor Power	3	03-08-2001 04:11 PM