BATTLE BOXES....when needed, and what brand?

Rick 91GT · 12-18-2001, 06:32 AM

Hey guys thanks for remembering me

Spenc2u

- I replied on one of your other threads to this subject but if anyone is interest I have 4 sets that are almost ready to go Rick91GT@onemain.com

Fully welding the boxes helps but I still ripped them apart now after I re-welded and installed the kit no issues what so ever, I really think my roll bar helps as well, takes all the flex out of the chassis. I run the SSM lowers as Five0 mentioned they tend to be hard on the boxes. The kit is twice as thick as the floor pan and facrory box material. They call it a "box" because it boxes the rear arm in, all the kit consisit of a top plate and a L-shaped plate that are made to fit up inside the one side, re-enforcing the factory metal.

I also made my own bottom plates similar to the Wolfes to keep them from spreading, very easy to do but these MUST BE WELDED IN, where the kit can be COMPLETLY BOLTED IN.

James- Hows the car running?

12-18-2001, 06:32 AM	#1
Rick 91GT Procharged! Join Date: May 1999 Location: Hanover, PA Posts: 1,539	Hey guys thanks for remembering me Spenc2u - I replied on one of your other threads to this subject but if anyone is interest I have 4 sets that are almost ready to go Rick91GT@onemain.com Fully welding the boxes helps but I still ripped them apart now after I re-welded and installed the kit no issues what so ever, I really think my roll bar helps as well, takes all the flex out of the chassis. I run the SSM lowers as Five0 mentioned they tend to be hard on the boxes. The kit is twice as thick as the floor pan and facrory box material. They call it a "box" because it boxes the rear arm in, all the kit consisit of a top plate and a L-shaped plate that are made to fit up inside the one side, re-enforcing the factory metal. I also made my own bottom plates similar to the Wolfes to keep them from spreading, very easy to do but these MUST BE WELDED IN, where the kit can be COMPLETLY BOLTED IN. James- Hows the car running? __________________ *D/R 10108 NMRA Drag Radial, 25.5 chassis, F1R* *Check out RNH Performance Performance Engines and Custom Fabrication.* *From Mild to Wild we can build what you want, when you want it.* FOR SALE Stainless Steel Torque Box Supports