cams and GT-40P head combos

quick89gt · 01-10-2001, 10:57 AM

Nicks 5.0 mentioned me in his post, so I'll tell ya little bit more about my car. I've got the crane 2031 cam, with 1.7 roller rockers, and the "P" heads. I love the way my car performs. Nicks5.0 was right, I've only been able to get 100mph trap speeds, but I also had little, if no traction and lowering springs on my car. With tires and suspension, I'm sure that number would be a few mph's higher. Anyways, the cam is also a good blower cam if you choose to go that route in the future. hope this helped...josh

------------------
*************************
'89 GT, T-5,
Bored .030 Over, GT-40P heads, MAC 1 5/8" headers, MAC Off-Road H-Pipe, 2 1/2" Flowmasters, Edelbrock 65mm T.B., Trick Flow Intakes, Crane 2031 cam, 1.7 Roller Rockers, Keith Black hyp. flat top Pistons, Screamin' Deamon Coil, Champion Plugs, March Underdrive Pulleys, 255lph Fuel Pump, SVO Motorsport Clutch, Adjustable Fuel Pressure Regulator, Formula GP Suspension, MAC Upper & Lower Control Arms, FMS 3.73 Gears.
*************************

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
4.6 cams help	GerryGT	Modular Madness	1	02-25-2004 04:24 PM
Cams?	quiksilver	Modular Madness	0	11-07-2001 10:44 PM
Erson makes Mod Cams????	Mercury	Modular Madness	2	09-28-2001 11:07 AM
how can you tell apart 99 heads and cams and 98 heads and cams	98 NosStang	Modular Madness	5	09-25-2001 11:51 PM
Question concerning HEADS and CAMS......	QuickSilver96	Modular Madness	0	12-12-1999 02:16 AM

01-10-2001, 10:57 AM	#8
quick89gt Registered Member Join Date: Apr 2000 Location: O'Fallon, IL Posts: 243	Nicks 5.0 mentioned me in his post, so I'll tell ya little bit more about my car. I've got the crane 2031 cam, with 1.7 roller rockers, and the "P" heads. I love the way my car performs. Nicks5.0 was right, I've only been able to get 100mph trap speeds, but I also had little, if no traction and lowering springs on my car. With tires and suspension, I'm sure that number would be a few mph's higher. Anyways, the cam is also a good blower cam if you choose to go that route in the future. hope this helped...josh ------------------ *********************** '89 GT, T-5, Bored .030 Over, GT-40P heads, MAC 1 5/8" headers, MAC Off-Road H-Pipe, 2 1/2" Flowmasters, Edelbrock 65mm T.B., Trick Flow Intakes, Crane 2031 cam, 1.7 Roller Rockers, Keith Black hyp. flat top Pistons, Screamin' Deamon Coil, Champion Plugs, March Underdrive Pulleys, 255lph Fuel Pump, SVO Motorsport Clutch, Adjustable Fuel Pressure Regulator, Formula GP Suspension, MAC Upper & Lower Control Arms, FMS 3.73 Gears. ***********************