MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old 12-20-2001, 10:52 PM   #5
ricekilla
Registered Member
 
Join Date: Sep 1999
Location: sinful boys SO CAL
Posts: 736
Default

with that kind of compression maybe stay w/ like 9-10 pounds of boost. w/ a centrifugal you might want to run about 10-11 degrees initial to haul you out of the hole then use a boost retard up top to help against detonation. also run at least 36 lb injectors and a 255 lph pump w/ your mods. instead of a piss poor fmu you might want to go w/ bigger injectors and a boost sensitive fuel pressure regulator. make sure you run high octane fuel and keep an eye on your pcv valve and your upper intake hoses cuz they willl all pop out under boost. maybe zip tie them down. go w/ a 80mm mass air and reduce your plug gap to about 35 thousanths and go 1 or 2 colder on the plugs . make sure your electronic system is up to the challenge. get a msd ignition w/ a boost retard, and make sure your wires and coil are in good shape. you will also need to fel-pro loc wire or o ring your heads. if you want a baddass, reliable, street blower get a powerdyne. if you want to get competitive get a novi. put in a fuel pressure gauge and watch that mofo like its gonna show you its tits! w/ blowers religious tuning is everything. keep your eye on the electric and fuel system, keep them strong and you'll be hauling a$$. good luck w/ the blower.
__________________
89 GT, 3.55's, longtubes, pro chamber, flowpath dumps, mac uppers and lowers+ pinion snubber, underdrive pullies, 70mm t-body, 190 lph penis pump, mildly home ported E7'S by the kid hisself, nitto drag radials..... 13.4 @ 106......... on nitto drag raidials. spinning like gangbusters......

chevy silverado w/ a full works suzuki RM 250 and a full works honda fourtrax 250R (girlfriends bike) in the back, moto x'in it up bro!
ricekilla is offline   Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Roots supercharger (like Kenne Bell)....who offers them? 84LX89GT Windsor Power 10 08-10-2006 06:23 PM
96 Cobra Supercharger questions mosibobo Modular Madness 8 08-09-2006 01:50 PM
FMU and Supercharger Pulley Question NitroNixon Windsor Power 3 05-14-2003 08:06 PM
Want Supercharger But have 9.8:1 comp. is this trouble? NewAge 5.0 Windsor Power 4 12-18-2002 08:50 AM
Paxton Supercharger Guys LOOK 89 Cobra LX Windsor Power 1 06-11-2002 03:10 PM


All times are GMT -5. The time now is 10:13 PM.


SEARCH