What should I do next?

[chris91LX]

MAF (C&L makes a nice 76mm unit), 65 or 70mm throttle body, I wouldn't go any bigger than 24 lb injectors unless you are going to go with a power adder like nitrous or a blower, the 24#rs are good up to around 400hp with an adjustable fuel pressure regulator (The Kirban is a very nice piece), a 190 or 255lph fuel pump (agin the 255 if your planning on going with big power later), maybe start looking at an ignition system (I've got the Crane HI-6S), and you can look at either porting the heads you have or going with a good set of aluminums, porting your intake and maybe figuring out what cam you have vs. what might work best with your combo. Work on matching your combination as well as you can and tuning it.