MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old 02-25-2002, 02:58 PM   #4
91GTturbo
Registered Member
 
Join Date: May 2001
Location: Valdese, NC
Posts: 361
Default

Whether you run the smaller injectors and an fmu vs. the larger injectors and no fmu is going to have no bearing on whether you pass emissions or not until you begin pushing well over 400 rwhp. If the emissions equipment (i.e; cats and smog pump) are still in place with the list of mods you've gave, then you'll be fine I would think.

You can get away with the 24's and an fmu, but your going to be pushing those injectors well over 90% of their duty cycle. Enough of this can cause injector failure. Plus with the amount of quality parts you have, you could have one big boat anchor if you don't use enough injector.

I run 30's with no fmu now with my setup. I've run 10 lbs of boost with a mixture of race/pump gas with no problems. All blown car react differently. Some need a chip, some don't, some can run 30 with no fmu and no driveability issues, some need an fmu. I say try the 30's minimum, you'll put to much strain on the 24's.
__________________
91 single turbo vert
91GTturbo is offline   Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:07 PM.


SEARCH