A couple small problems - Need advice

2FastLX · 04-13-2001, 12:58 AM

I'll get you a pic tonight or tomorrow. I'm going to my brothers tonight (65 mile drive) to install the gears and get our cars ready for the race.

The white face A/C guages looks pretty close to the MAC white face speedo face so if you get one you will be happy with it. It is actually a better quality than the MAC faces in my opinion.

I don't think we pinched the vent tube, but that is probably what it is. It wasn't doing this before the fuel pump install so it has to be something simple.

I am going to try to pick up an overflow tank tomorrow if any place is open. If not I'll just try to make my stock one work somehow. Since I removed the shroud for the electric fan I have to come up with some type of mount.

My water pump is fine. The car is staying cooler than it ever has with this setup. I just got the biggest electric fan Auto Zone sells and have the Stewart pump and a 180 degree thermostat. I'd highly recommend this setup because it's a killer combo and was pretty cheap.

------------------
ICQ# 42269241
Indiana Stangers Association
Buy your parts here

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
common problems??	f1jqcart	Modular Madness	4	07-03-2004 11:51 PM
grr...starting problems..any ideas?	Frankenstang65	Classic Mustangs	16	07-07-2003 09:50 AM
Advice on injectors...PKRWUD I'd like your advice on this one as well	silver_pilate	Windsor Power	3	06-09-2003 08:59 AM
HELP: Problems after Paxton Novi 1000 install	Meatman	Windsor Power	3	10-17-2002 06:03 PM
advice needed on buying a 5.0	Will G	Windsor Power	12	02-08-2001 04:18 PM

04-13-2001, 12:58 AM	#4
2FastLX The Photoshop Guru Join Date: Feb 2001 Location: Mecca, Indiana Posts: 1,419	I'll get you a pic tonight or tomorrow. I'm going to my brothers tonight (65 mile drive) to install the gears and get our cars ready for the race. The white face A/C guages looks pretty close to the MAC white face speedo face so if you get one you will be happy with it. It is actually a better quality than the MAC faces in my opinion. I don't think we pinched the vent tube, but that is probably what it is. It wasn't doing this before the fuel pump install so it has to be something simple. I am going to try to pick up an overflow tank tomorrow if any place is open. If not I'll just try to make my stock one work somehow. Since I removed the shroud for the electric fan I have to come up with some type of mount. My water pump is fine. The car is staying cooler than it ever has with this setup. I just got the biggest electric fan Auto Zone sells and have the Stewart pump and a 180 degree thermostat. I'd highly recommend this setup because it's a killer combo and was pretty cheap. ------------------ ICQ# 42269241 Indiana Stangers Association Buy your parts here