Threaded Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
03-11-2002, 06:03 PM
|
#3 |
|
Import Slayer
Join Date: May 1999
Posts: 2,241
|
The heads will bolt on but the water passages are different. There is way to make them work but I forget what you need to do. I read an article a while back that showed them putting 351C heads on a 302 block. They called it cleavor. I think the head bolts are different sizes also. I could be wrong about that though.
You will also need headers that fit a 351...not a 302. the 302's will fit but the driver's side will not clear the steering shaft. The tubes on the 351 headers are routed different. I found out the hard way!!
__________________
'82 GT 351W (.060)Comp Cams 274* Extreme Energy cam, ported & polished heads w/ 1.94/1.60 valves 10.3:1 flat top pistons,stealth intake, Mallory dizzy,Holley 750dp carb, BBK shorties,Flowmaster exhaust,C-4 with 3700 stall converter, B&M pro shifter,8.8 rear, 4:10's, subframes, electric fan, powermaster alternator, 4 core radiator. |
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Cobra Engine Swap...Ways to improve my 98 GT... | xtrememach1racer | Modular Madness | 3 | 10-31-2002 11:23 AM |
| 66 T to 5.0 swap | yenrab | Classic Mustangs | 1 | 03-23-2002 11:12 PM |
| T-56 or other 6-speed swap in 65 Fastback | DJs350H | Classic Mustangs | 2 | 09-06-2001 03:57 PM |
| Rearend swap | H'YAMULE | Classic Mustangs | 0 | 02-19-2001 09:48 AM |
| 2.3 turbo swap | frankiebonzz | Small Ponies | 0 | 06-01-2000 07:44 PM |