OPINIONS ON FUEL PRESSURE

TEXSN95 · 04-13-2001, 02:18 PM

[QUOTE]Originally posted by NOS_Notch:
[B]that is what you want...if you can adjust it...you may want to go up or down 2 pounds to see what it does to your trap speed.
You can run quicker if you lean it sometimes...depends on your car.....
But where is your timing at??? your trap speed (no matter what your ET or 60' time was) should be around 110 i would say....w/ about a 12.40-12.70 ET.
Even if you spun like crazy....Trap speed is about the same.

After I put the cold air on it, it leaned it out quite a bit. It isnt adjustable, so I'm gonna have to live with it for now. You really think I should run that fast on radials with 308s? I had a 2.22 60ft, and I'm going back tonight since it's running alot better compared to last time. I'm hoping for a 13.3 @ 106 or so. I'll post my times later on tonight.

------------------
Clint L.
White 95 Cobra #3637
58cc GT40X heads with mild porting, Crane 2031 cam, FRPP 65 TB, 1.7s, Cobra intake, homeade cold air, pullies, Tokico Illuminas, C springs, GW lower control arms, Steeda CC plates, aluminum driveshaft, Steeda quadrant, MSD6A, Mac shorties, off road hpipe, 2 1/2 ultra flow w/ dumps, R hood, Euro clear corners...13.74@103.5...better times coming friday :-).

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fuel Pump Pressure?	Swarzkopf1	Windsor Power	3	08-31-2004 02:07 PM
fuel pressure issues	mustang98gt	Modular Madness	3	07-05-2003 10:43 PM
Please Help...Fuel pressure keeps moving.	Dark_5.0	Windsor Power	2	04-06-2002 01:31 AM
fuel pressure and bad injectors???	wrathchild	Windsor Power	1	10-02-2001 06:40 AM
Fuel pump and fuel pressure regulator upgrade, opinions?	chris91LX	Windsor Power	3	02-26-2001 11:21 AM

04-13-2001, 02:18 PM	#1
TEXSN95 Registered Member Join Date: Mar 2001 Location: college station, tx Posts: 143	[QUOTE]Originally posted by NOS_Notch: [B]that is what you want...if you can adjust it...you may want to go up or down 2 pounds to see what it does to your trap speed. You can run quicker if you lean it sometimes...depends on your car..... But where is your timing at??? your trap speed (no matter what your ET or 60' time was) should be around 110 i would say....w/ about a 12.40-12.70 ET. Even if you spun like crazy....Trap speed is about the same. After I put the cold air on it, it leaned it out quite a bit. It isnt adjustable, so I'm gonna have to live with it for now. You really think I should run that fast on radials with 308s? I had a 2.22 60ft, and I'm going back tonight since it's running alot better compared to last time. I'm hoping for a 13.3 @ 106 or so. I'll post my times later on tonight. ------------------ Clint L. White 95 Cobra #3637 58cc GT40X heads with mild porting, Crane 2031 cam, FRPP 65 TB, 1.7s, Cobra intake, homeade cold air, pullies, Tokico Illuminas, C springs, GW lower control arms, Steeda CC plates, aluminum driveshaft, Steeda quadrant, MSD6A, Mac shorties, off road hpipe, 2 1/2 ultra flow w/ dumps, R hood, Euro clear corners...13.74@103.5...better times coming friday :-).