Just Got gear installed!!!! Urgent

[Rick 91GT]

Originally posted by dinomite:
I've never had gears done, but from what I hear, if they are making noise, the gears aren't ligned up right and you should head your *** back to the shop.

He's right your gears should NOT be whining, if they are they are set to tight and will wear out. I would get you car back to the shop as soon as you can so they will stand behind their work.

As far as getting your speedo right what NOS_Notch was eluding to was some times it is possible that you need to change the gear that is in the tailshaft of the tranny, I am running a red ford gear on the speedo cable with (I believe) a 6 tooth yellow gear in the tailshaft. I am swapping to 4:30 gears and there isn't correct combo out to make the speedo correct.



------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon!