MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old 03-18-2002, 05:11 PM   #3
DZEE'S LX
Registered Member
 
DZEE'S LX's Avatar
 
Join Date: Jan 2001
Location: Salt Lake City
Posts: 117
Default

March makes good pulleys and has a pretty good selection. There are several other brands that I'm sure are fine also. They all pretty much do the same thing. You usually get to choose from steel or aluminum. I would stay away from off-brands or cheap ones though. A bad pulley will waste your accessories or could possibly break causing muxh damage.

As mentioned there are gernerally 3 pulleys in a set but you can use any combination of them - check your belt length though. The crank pulley is smaller and the w/p & alt are bigger. They will sometimes offer "race" sets or "street" sets depending on how bad you want your accessories to work. Slower accessory speed means you don't lose as much h.p.

Be careful of how your car reacts. Like the previous post your charging will most likely suffer without a 130 amp alt. With my March pulleys I don't charge at idle but it does when over about 900 rpm. At night with lights, stereo, heater fan/wipers etc it doesn't charge near as much.
Be VERY careful about cooling. I saw a big difference in the summer. Overheated a little at one of the August autocross events.

Install is fairly straight forward. You will need a allen head socket for the crank pulley because the smaller dia pulley doesn't offer as much clearance for the stock bolts. Might be able to use stock bolts with other brands.

You will free up some h.p. but you may have to beef up either of these systems depending on how your car is set up and how you use it.

Dan
__________________
Spec Service (UHP), BFG G-Force KDW's, Turbo Coupe 3.55 rear w/disks, 73mm calipers, Stg 1 Twisted Wedges, TFS Street Intake, 70mm TB, E cam, Crane 1.7's, Aeromotive FPR, BBK 1 5/8 shorties, elec fan, FMS Al Radiator, Moroso Wires, Kenne Bell Ramair, March pulleys, Race Magnums, 190 lph Walbro, FMS Al Dshaft, D/S loop, MM 4point rollbar, FMS C spngs, strut tower brace, Tokico Illuminas, Prothane bushings, MM Lwr Conrol Arms, KB welded subs, Cervini Mach 1 hood/valence/side skirts/wing/airdam.
DZEE'S LX is offline   Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Underdrive pulleys for street racing SMoKEDya95Stang Stang Stories 13 11-05-2002 10:54 AM
underdrive pulleys SMoKEDya95Stang Small Ponies 0 10-29-2002 11:40 PM
underdrive pulleys SMoKEDya95Stang Small Ponies 0 10-29-2002 11:39 PM
Supercharging...remove underdrive pulleys?? quick89gt Windsor Power 4 04-03-2001 10:15 PM
ASP underdrive pulley's Shotgun28 Windsor Power 2 01-15-2001 12:55 AM


All times are GMT -5. The time now is 10:50 PM.


SEARCH