60 Ft. Times

Killercanary · 04-22-2001, 10:09 PM

I managed 1.91 60's with Nitto drag radials size 245-50-16. My car has roughly 270FWHP, or 235rwhp. It weighs in excess of 3700lbs too. This was done with stock control arms, springs, and w/o subframe connectors

My dad's very mildly modified 91GT cuts 1.88-1.89 60's on Mickey Thompson sportsman pro tires, subframe connectors, 3.55's, and exhaust- his best ET is a 13.6 at 98.7mph with a 1.89 60'. He has replaced the upper and lower control arms, as well as swapped in 3.73's for the 3.55's, but the 60's stayed the same

------------------
95 GT convt' 5 speed, 3.73's,FMS HD clutch, Pro 5.0 shifter, ASP alum. underdrive pulleys, Bassani offroad X pipe, 2 chmbr flowmasters, K&N w/o silencer, edelbrock performer intake, FRPP 65mm T-body, FRPP shorty headers, FRPP aluminum driveshaft.Hooker 4pt chrome car bar, Xenon/Wings West ground effects, custom interior
Best ET: 13.83
Best MPH: 98.55mph with Best 60': 1.91 on Nitto DR's
Homepage: <A HREF="http://www.angelfire.com/pa2/killercanary" TARGET=_blank>http://www.angelfire

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Check out these times and tell me how i can get better!	1jimmy__d	Stang Stories	6	06-24-2003 01:07 PM
Track Times With the new Tires!!!!!	Stang Runner	Stang Stories	6	10-20-2002 08:31 PM
New Track times On the good old SD and STOCK Short block	Stang Runner	Stang Stories	1	10-10-2002 06:25 PM
4cyl times and #'s??	HiFlow5 0	Blue Oval Lounge	11	03-25-2002 10:23 AM
New times new times .what would traction net me?	SKYWLKR	Windsor Power	3	01-14-2002 08:34 PM

04-22-2001, 10:09 PM	#6
Killercanary Registered Member Join Date: Nov 1999 Location: Altoona, PA Posts: 336	I managed 1.91 60's with Nitto drag radials size 245-50-16. My car has roughly 270FWHP, or 235rwhp. It weighs in excess of 3700lbs too. This was done with stock control arms, springs, and w/o subframe connectors My dad's very mildly modified 91GT cuts 1.88-1.89 60's on Mickey Thompson sportsman pro tires, subframe connectors, 3.55's, and exhaust- his best ET is a 13.6 at 98.7mph with a 1.89 60'. He has replaced the upper and lower control arms, as well as swapped in 3.73's for the 3.55's, but the 60's stayed the same ------------------ 95 GT convt' 5 speed, 3.73's,FMS HD clutch, Pro 5.0 shifter, ASP alum. underdrive pulleys, Bassani offroad X pipe, 2 chmbr flowmasters, K&N w/o silencer, edelbrock performer intake, FRPP 65mm T-body, FRPP shorty headers, FRPP aluminum driveshaft.Hooker 4pt chrome car bar, Xenon/Wings West ground effects, custom interior Best ET: 13.83 Best MPH: 98.55mph with Best 60': 1.91 on Nitto DR's Homepage: <A HREF="http://www.angelfire.com/pa2/killercanary" TARGET=_blank>http://www.angelfire