Track times are these good?

silver_pilate · 04-25-2001, 01:43 PM

In order to get your reaction times down, you're going to need to get the timing of the lights down. Go down to the track some day and sit and watch the tree. Time it so that you know exactly when the green hits. Actually, you'll probably need to stage shallow and then go on the second yellow. Play with it until you figure it out.

Also, Load up your suspension some by doing a break stand. Just make sure you don't give it too much gas and start to creep. Even trying to hold the revs at 1000-1200 rpm's will help load up the transmission. This takes up some of the slack and lets you leave quicker.

Good luck, and let me know how it turns out. Don't get too frustrated with the AOD. I always wanted a 5 speed (maybe my next car...no wait, that's going to have to be a built C-4 in order to hold that 650 hp from my next motor

), but I got an AOD and after building it up, I am very pleased. I can take almost any 5 or 6 speed off the line on street radials simply because I don't spin. My car skips the tires perfectly all the way through 1st (that fine line between spinning and not spinning), and then it hooks completely at the end of 1st and is gone. I've raced couple of Z28's and I've pulled at least two car lengths almost immediately off the line. After that, it's up to their motor to catch me.

Good luck and just have fun with it. As far as converters go, Precision Industries is the best out there. Don't settle for cheap crap when you get a converter. The money you pay is definately worth it here (read...no breakage). Lentech and PA also make a good converter.

--nathan

------------------
--silver_pilate

'91 GT, Built 306, Wolverine 1087 cam, ported Windsor Jr. Irons, and all the goodies...click the link to the left to see a full list of my mods...

Tried and True 302 Being Built to Outrun You! heh heh heh...
--Texas Panhandle--
Check out my site

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Track times - Unbelievable	88workcar	Windsor Power	4	08-15-2002 06:16 AM
I FINALLY have track times!!	Stang_Crazy	Stang Stories	11	07-31-2002 06:44 PM
New best times from the track Friday.	Bill Duke	Windsor Power	3	07-30-2001 10:14 AM
Track Times Down After Mods	PeTr0	Windsor Power	11	07-28-2001 03:55 PM
Got back from track and have new times	Ares	Modular Madness	5	05-01-2001 05:59 PM

04-25-2001, 01:43 PM	#13
silver_pilate DURKA DURKA!! Join Date: Sep 1997 Location: Lubbock, TX...(TX panhandle) Posts: 1,418	In order to get your reaction times down, you're going to need to get the timing of the lights down. Go down to the track some day and sit and watch the tree. Time it so that you know exactly when the green hits. Actually, you'll probably need to stage shallow and then go on the second yellow. Play with it until you figure it out. Also, Load up your suspension some by doing a break stand. Just make sure you don't give it too much gas and start to creep. Even trying to hold the revs at 1000-1200 rpm's will help load up the transmission. This takes up some of the slack and lets you leave quicker. Good luck, and let me know how it turns out. Don't get too frustrated with the AOD. I always wanted a 5 speed (maybe my next car...no wait, that's going to have to be a built C-4 in order to hold that 650 hp from my next motor ), but I got an AOD and after building it up, I am very pleased. I can take almost any 5 or 6 speed off the line on street radials simply because I don't spin. My car skips the tires perfectly all the way through 1st (that fine line between spinning and not spinning), and then it hooks completely at the end of 1st and is gone. I've raced couple of Z28's and I've pulled at least two car lengths almost immediately off the line. After that, it's up to their motor to catch me. Good luck and just have fun with it. As far as converters go, Precision Industries is the best out there. Don't settle for cheap crap when you get a converter. The money you pay is definately worth it here (read...no breakage). Lentech and PA also make a good converter. --nathan ------------------ --silver_pilate '91 GT, Built 306, Wolverine 1087 cam, ported Windsor Jr. Irons, and all the goodies...click the link to the left to see a full list of my mods... Tried and True 302 Being Built to Outrun You! heh heh heh... --Texas Panhandle-- Check out my site