MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old 04-30-2002, 10:26 PM   #4
1995MGTS
Registered Member
 
1995MGTS's Avatar
 
Join Date: Mar 2001
Location: Chesapeake, VA USA
Posts: 69
Default

I had a generic Hypertech chip a long time ago and to be honest, it was a huge waste of money. Now that was 5 years ago and maybe they have gotten better through the years but I would say don't waste your money.

A friend of mine had a custom tuned chip in his almost stock 95GT and it just ran circles around mine. He bought the car used and didn't know what kind of chip it was. So I went out and got gears, pullies, o/r h-pipe, cat-back, and the generic Hypertech. His pullies, tb, stock 3.08 gears, and custom chip car pulled harder through all the gears and was just plain faster. That chip maximzed his air-fuel ratios for max performance, did away with the tip-in timing retard, turned his fan on earlier, and did away with the 2 second delay when going to wot (at least this is what I assume it did since it was a custom design and that's normally what they do).

Again, maybe the Hypertechs do that now but I don't know. If it's still the same old program, I would say save your money and spend it on something worthwhile. Just my two cents
__________________
2003 Redfire Cobra #5978 of 8394
-Pro-5.0
-DC cai
-Steeda x-pipe w/cats
-Steeda cat-back
-Lightning pulley w/Afterburner
441rwhp/434rwtq SAE
1995MGTS is offline   Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
eliminating power steering? greengoblin Windsor Power 5 04-23-2003 12:03 PM
Bradenton: Bad News, Good News And a Compliment! lx mike Stang Stories 5 04-07-2003 10:14 AM
I need a good 4 or 6 point roll bar. What's a good company? tireburner163 Blue Oval Lounge 18 02-16-2003 01:36 PM
Fosgate amps. Dark_5.0 Audio, Security, & Electronics 3 06-20-2001 12:29 AM
POWER HEADS?need advice joey50gt Windsor Power 3 04-06-2001 03:35 PM


All times are GMT -5. The time now is 06:20 AM.


SEARCH