

© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
![]() |
#2 |
Conservative Individualist
Join Date: May 1997
Location: Wherever I need to be
Posts: 7,487
|
![]() The PCV is located on the very end of the intake, in the center. To find it, on a cold engine use a strong light or just go by 'feel'. The thick PCV hose goes into it so feel for that. It's a unit; a screen, the valve and a grommet. Buy the kit at any Ford dealer. About $10.
The baffle is an 'air silencer' in the right front fender. It's meant to quiet the intake of air. It's useless - and removing it can be worth as much as 4 HP. Well worth it for a freebie that's easy to do. To remove it, you have to first remove the plastic airbox that holds the air filter (a few small bolts). Then remove the protruding bolts from the fender that hold the silencer. Then, you have to simply wiggle it out of the fenderwell. A little tricky but just have patience - it comes out eventually. Thousands have been successfully removed from Mustangs over the years. Not only do you pick up a few HP, but when you floor it, the sound is awesome. I would suggest the Ford Racing kit for a Mass Airflow conversion or simply buy the parts off a wreck and replace what's needed. A lot cheaper that way. |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Just got a 98, have some questions? | 98GTNewbie | Modular Madness | 5 | 08-30-2003 12:41 AM |
Quick questions on Explorer Intake install. | Falcons Talon | Windsor Power | 2 | 08-21-2003 12:40 PM |
Several questions about oil. | zepherman | Windsor Power | 3 | 08-03-2002 06:59 AM |
HELP! Newbie 95-96 GT questions | Ron Brooks | Blue Oval Lounge | 7 | 07-11-2001 07:38 PM |
S/R Questions | DAMION | Racer's Club House | 1 | 09-30-1999 11:02 AM |