MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old 05-18-2002, 10:42 AM   #5
silver_pilate
DURKA DURKA!!
 
silver_pilate's Avatar
 
Join Date: Sep 1997
Location: Lubbock, TX...(TX panhandle)
Posts: 1,418
Default

Check out Baumann's site. They've got some good tech info on there as well.

http://www.baumannengineering.com/

Transgo, unfortunately, doesn't have a site. They can be ordered from Summitt or other places for around $110.

The Transgo kit I used made dramatic improvements in shift quality and firmness at WOT. It was also much firmer under normal cruising conditions, but it wasn't harsh at all. Under throttle the tranny shifted hard and fast...hard enough to chirp 2nd with the stock converter. When I put the 2800 rpm PI converter in, it absorbed some of that firmness, but it was still worlds over stock. For a stock AOD, the best mods you can (and need) to do are a quality shift kit, a higher stalling torque converter, and some steeper gears (3.73's or 4.10's).

The shift kit by itself is going to make your car much more fun to drive. You still will have to play the 1-D-1 shuffle if you want to hold 2nd gear, but driving is going to be much more fun, reguardless. When you can afford to, look into a torque converter. It was absolutely the best mod I did to my car, and is the best thing you can do to an AOD car short of adding the squeeze or boost. Most people see a drop of .4 - .5 seconds from their quarter mile after a converter and shift kit. With the shift kit alone, you still will drop some time off your et...maybe as much a 1-2 tenths depending on how bad your stock AOD is.

--nathan
__________________
'91 GT, Coast 347, 9.5:1 compression, full intake, Wolverine 1087 cam, exhaust, Keith Craft ported Windsor Jr. Irons (235 cfm intake, 195 cfm exhaust), AOD, PI 3500 converter, Lentech valve body, 3.73's (4.10's in the works), and Yokohama ES100's out back.

Daily Car: '04 Infiniti G35 Sedan 6MT
silver_pilate is offline   Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
AOD 1-2 shift Barry Jackson Windsor Power 1 11-05-2002 11:44 AM
Trans-Go Shift kit question? 90'5.0 Conv Windsor Power 5 02-26-2002 04:40 PM
AOD Shift 1st, 3rd, 4th...Hello... 2nd?!? jz_mustang50 Blue Oval Lounge 2 09-18-2001 11:30 PM
anyone shift higher on 3-4 shift? fiveohpatrol Windsor Power 4 09-16-2001 08:39 PM
Is this a Hurst shift lever? Gautam Blue Oval Lounge 0 02-22-2001 10:39 AM


All times are GMT -5. The time now is 06:33 PM.


SEARCH