Threaded Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
05-20-2002, 01:27 PM
|
#8 |
|
Registered Member
Join Date: Sep 1998
Location: Toledo, Ohio, USA
Posts: 269
|
I just installed a 31"X19" Griffin universal NASCAR radiator in my 89 LX.
I was able to use the stock fan and shroud without too much trouble. The fan is closer to the rad, but not too far, I dropped the shroud in with the fan/clutch off, then put the fan on and found where to mount the shroud. I used two HEAVY zip ties at the top, and radiator shroud clips from the "Help!" line of stuff at the autoparts store. My biggest issue was the line from the overflow running into the lower radiator hose.
__________________
1989 LX Convertible, blue with white top and leather, 5 speed. Engine: GT40 al. heads, Cobra intake, TFS cam, 1.7RR, etc.... LOLDrivetrain: SPEC II clutch & FMS Billet flywheel, Pro 5.0 shifter w/Cobra knob and aluminum driveshaft through 3.73:1 gears.Chassis: 4 wheel disk w/Cobra front brakes, GT rears and 2001 "Bullitt" wheels Rear: MM adjustable LCAs with Griggs springs, KYB shocks. Front: Koni red struts, FMS "C" springs and full poly bushings. Full length MM sub frame connectors, steeda 2pt. K-brace.Misc.: 130a alt. upgrade, R134a conversion. Photos of my car |
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Affect of Fan Shroud on Cooling? | LowDown | Windsor Power | 13 | 07-20-2002 08:55 PM |
| fan shroud interchangeability | stng87 | Windsor Power | 0 | 09-02-2001 11:14 AM |
| Missing Fan Shroud Bolts | DAVISinLA | Windsor Power | 2 | 04-27-2001 12:54 PM |
| Painting Fan Shroud? | 8950 | Appearance & Detailing | 5 | 10-26-2000 09:06 AM |
| fan shroud | 69'STANG | Classic Mustangs | 1 | 09-30-1999 09:22 AM |