
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
|
#2 |
|
Registered Member
Join Date: May 1999
Posts: 5,246
|
Okay. I'm not an expert on the modular cars, but let's see what I can do since you asked.
The Lincoln Mark VIII came with the AOD-E transmission during it's production run from 1993-1998. During that time it was equipped with the 4.6L DOHC 32V engine, almost exactly the same as the Cobra's. I really doubt there are any differences between the Mark VIII block and the Cobra block, and I would be suprised if all the 4.6's didn't use the same bolt pattern on the transmissions. If you were in a pinch for a computer, the Mark VIII computer should run the AOD-E, but I don't know if the Cobra's will since the Cobra was never offered with an auto tranny. Basically, it doesn't seem like a real complicated swap to me on the surface. You shouldn't have to do any engine compartment mods, I would assume the tranny will bolt up fine, and you should have access to auto computers for the DOHC 4.6L from the Mark VIII. As far as your other mods, I don't know how the rest of your systems will interact with the Cobra parts. If I had more knowledge about the newer engines, I'd certainly share it. Good luck, Kell |
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| What all do you need to do rear disc conversion w/ SN95 Parts | KG88GT | Windsor Power | 1 | 07-29-2003 01:45 PM |
| questions about maf conversion | spankaveli | Windsor Power | 10 | 10-19-2002 02:46 PM |
| 5 to 4 lug conversion | mike_navigator | Blue Oval Lounge | 7 | 08-14-2002 11:17 PM |
| Spindles for Brake Conversion | Vishnoff | Classic Mustangs | 2 | 08-06-2002 04:12 PM |
| mass air 87GT conversion | greydan | Windsor Power | 3 | 01-02-2002 07:57 PM |
