Got A Miss ????????

[CinciCobra]

Originally posted by southernstang97
Just like what hammer had to say , i would check there and sure you will find that will be the problem !!!

Do you have a msd dis-4 ignition , and if not I would go out and get one ASAP. Or a ignition that is as good as the msd !!! It is designed to work on the 4.6l engine that are blown or have juice.

I am running a Jacobs DIS - a tech at ATI suggested it as he runs it on his cobra with the exact same blower set up. It is an excellent combo.

I checked all of the plug wires and they are carrying voltage just fine, and after I replaced the plugs AGAIN, I pulled them and found two cylinders were weird. One the plug was totally fouled and the other was wet with gas. I am starting to think my injectors are sticking or not getting the correct voltage. Anyone know what exactly they should be getting?