EFI conversion Need help FAST!

65efi · 07-09-2002, 10:36 PM

As far as the alternator goes, I'm running a one-wire GM unit on mine and it works fine (I know, it's a Chevy part, but one-wire alternators for Fords are twice as much).

Again, you said you were getting an air bypass code...what is the code number? Are you still getting the code?

You should be idling at around 600 RPM.

Have you checked the basics.....ignition timing, check the engine vacuum at idle, clean air filter, check for vacuum leaks. Many times it's the basics that will get you.

Other tests you can do quicly and easily just to rule items out include testing the ISC and the TPS. Check the Idle Speed Control solinoid by disconnecting it while the motor is running. The RPM should drop way down or even die. Check the TPS to make certain the voltage changes smoothly throughout the throttle range. They often develop 'flat spots'.

As far as your engine running with the key off, that's a mystery to me. Perhaps a bad ignition switch?

You had said you head a click near the computer. Check to see if it's coming from one of the relays. You computer is solid state, and has no moving parts. Most likely it's a solinoid mounted near the computer, and that might also be a key to your problems.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What all do you need to do rear disc conversion w/ SN95 Parts	KG88GT	Windsor Power	1	07-29-2003 01:45 PM
questions about maf conversion	spankaveli	Windsor Power	10	10-19-2002 02:46 PM
Super cars and Fast and the Furious	#1 Pony	Blue Oval Lounge	9	01-29-2002 12:54 AM
Need Help Fast on 87GT Disc Brake Conversion	z3beemer	Windsor Power	0	05-06-2001 01:22 PM
Pesky Supra, actually thought he had a fast car.	Unit 5302	Stang Stories	7	03-20-2001 01:34 PM

07-09-2002, 10:36 PM	#1
65efi Registered Member Join Date: May 2002 Location: Portland, OR Posts: 37	As far as the alternator goes, I'm running a one-wire GM unit on mine and it works fine (I know, it's a Chevy part, but one-wire alternators for Fords are twice as much). Again, you said you were getting an air bypass code...what is the code number? Are you still getting the code? You should be idling at around 600 RPM. Have you checked the basics.....ignition timing, check the engine vacuum at idle, clean air filter, check for vacuum leaks. Many times it's the basics that will get you. Other tests you can do quicly and easily just to rule items out include testing the ISC and the TPS. Check the Idle Speed Control solinoid by disconnecting it while the motor is running. The RPM should drop way down or even die. Check the TPS to make certain the voltage changes smoothly throughout the throttle range. They often develop 'flat spots'. As far as your engine running with the key off, that's a mystery to me. Perhaps a bad ignition switch? You had said you head a click near the computer. Check to see if it's coming from one of the relays. You computer is solid state, and has no moving parts. Most likely it's a solinoid mounted near the computer, and that might also be a key to your problems.