Hybrid Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
|
08-06-2002, 03:24 PM
|
#1 |
|
Registered Member
Join Date: Jun 2001
Location: Lynwood, CA, U.S.A.
Posts: 82
|
Steering pump update
I did some digging a few backs on the KRC power steering pump, and found (not surprised), that you could get the same power steering pump that TCP suggest MSRP to be $799, for only $215 which doesn't include the aluminum reservoir and mount, but for those pieces the most you would pay would be approximately $70 (not sure, I did my math before, but it's been a while!). I found that:
http://www.charlottewheel.com/catalo...r_steering.htm These guys, offer these items for decent prices (relative to what TCP suggests). Anyway, thought I would let you all know. By the way, I also called KRC and found that the valve was adjustable on the pump, so if you wanted you would tighten/lossen the valve and you could change the assist from the pump on the fly without haveing to put a different valve fitting. Enjoy!
__________________
65 Mustang Coupe...Comp Cams 262 Xtreme Energy, T-5 conversion, Romac Balancer, 620 Front Springs-4.5 Mid-eye rear springs.......work in progress |
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Rack and pinion | schizcat | Windsor Power | 1 | 12-15-2003 07:26 AM |
| Rack & Pinion or Stock steering for '67 | Yellow67GTA | Classic Mustangs | 0 | 09-30-2002 10:04 PM |
| autozones rack and pinion any good | richie | Windsor Power | 6 | 08-25-2001 01:40 PM |
| Rack & Pinion Steering in a 67' | Fostang | Classic Mustangs | 0 | 02-03-2001 10:59 PM |
| Power Rack & Pinion for Classic Ponys | 67 Ponyracer | Classic Mustangs | 1 | 05-28-1999 10:29 PM |