

© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
![]() |
#9 |
Registered Member
Join Date: May 2002
Location: New Jersey
Posts: 375
|
![]() Ok. maybe you guys can give help me out with all this cuz this other problem is related too. As the above posts state, i lost my low end after a airaid filter, 76mm mass air and 65mm throttle body were added. Now i went to the tech50 webpage and followed thier directions for adjusting my idle. Only problem is i can't get the idle below 1100 rpms. I have a feeling this is relating to the non existant power i have. This loss of power is through the entire rpm range though, up to 5500 rpms. When i went to adjust myy timing, the tpw is at ~.92 and with the iab unplugged, when i back out the idle screw it won't drop below 1050 rpms. I can screw the idle adjustment in and raise the idle but i can't drop it below ~1100 rpms. I'm guessing that i should fix this problem before i try to get all my power back. All this help has been great and anymore would be even better. thanks guys.
__________________
'89 LX 5.0, off-road h pipe, flowmaster muffs, underdrive pulleys, rebuilt WC T-5, King Cobra Clutch, 65mm throttle body, Explorer Upper/GT40 lower, Lakewood Rear Lift Bars. 76mm C&L Mass air w/ inlet pipe, Twisted wedge heads w/ stage 2 port,polish, MAC equal length shorties, Billet AFPR, 255LPH fuel pump, fresh low end w/ 10.5:1 compression. If anyone ever wants to go to Raceway Park in Englishtown New Jersey, give me a shout. RICER HATERS CLUB MEMBER 87! www.ricehatersclub.com |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
tricks to find vacuum leak | fiveohpatrol | Windsor Power | 5 | 10-03-2002 06:15 PM |
Pondering Life, and the use of the Science behind it. (Might Find boring.) | Mercury | Blue Oval Lounge | 10 | 12-05-2001 01:46 AM |
Lost My Job!!!! | joe4speed | Blue Oval Lounge | 16 | 11-28-2001 03:06 PM |
im lost, cant find the leak, please help! | fiveohpatrol | Windsor Power | 5 | 02-19-2001 08:21 AM |
Where can I find a custom gauge bezel?! | BossGuy | Classic Mustangs | 0 | 03-17-2000 04:04 PM |