Blowers Blowers Blowers

SKYWLKR · 01-12-2001, 07:01 PM

SKY,

When I got my kit I got an extra H.O. bypass(complete with valve, blower outlet blower inlet peice,and all the tubing).The outlet(aluminum) was drilled for NOS but there is a bolt in it and it is around back so you dont see it unless you look for it.make me a fair offer if you want it.

This is a must for over 8psi.It say's Vortech on it ,but it can be ground off,and will bolt on and work fine with the Paxton.
this will help the blower live at those boost levels.

The 24's will Barly be enuf and your fuel pump will need more flow,at least a 255 lph. Anything smaller wont flow nearly enuf at the pressures you'll need to be safe.

It's best to go with at least 30's but better yet get 36's and ditch the FMU.

Personally I'm going with either 42's or 36's modified to flow near 70lbs, a 190 intank with a aeromotive fuel pump,no FMU and a JMS chip.

------------------
A.K.A. The LS1 Eater http://members.aol.com/jeauxmoe/index.html 5.0 lx,performer heads, GT-40 intake,JBA headers,stock cam and TB to name a few. 12.3@111.7 w/a 1.70 60ft 13.002 @109.8 on street tires w/a 1.96* 60 ft.

Update 11.89@115 1.63 60ft

[This message has been edited by SKYWLKR (edited 01-12-2001).]

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Blowers	Rodoggx	Windsor Power	12	05-31-2003 05:20 PM
I have questions about blowers	GRLDRIVER	Blue Oval Lounge	2	07-12-2001 11:40 PM
blowers?!?	hottiescottie	Blue Oval Lounge	13	02-07-2001 11:33 AM
kenne bell blowers..how are they??	LX XLR8R	Windsor Power	12	01-24-2001 12:38 PM
Saleen roots blowers	slvr99gt	Modular Madness	2	09-17-2000 07:36 PM

01-12-2001, 07:01 PM	#16
SKYWLKR Registered Member Join Date: May 1999 Posts: 103	SKY, When I got my kit I got an extra H.O. bypass(complete with valve, blower outlet blower inlet peice,and all the tubing).The outlet(aluminum) was drilled for NOS but there is a bolt in it and it is around back so you dont see it unless you look for it.make me a fair offer if you want it. This is a must for over 8psi.It say's Vortech on it ,but it can be ground off,and will bolt on and work fine with the Paxton. this will help the blower live at those boost levels. The 24's will Barly be enuf and your fuel pump will need more flow,at least a 255 lph. Anything smaller wont flow nearly enuf at the pressures you'll need to be safe. It's best to go with at least 30's but better yet get 36's and ditch the FMU. Personally I'm going with either 42's or 36's modified to flow near 70lbs, a 190 intank with a aeromotive fuel pump,no FMU and a JMS chip. ------------------ A.K.A. The LS1 Eater http://members.aol.com/jeauxmoe/index.html 5.0 lx,performer heads, GT-40 intake,JBA headers,stock cam and TB to name a few. 12.3@111.7 w/a 1.70 60ft 13.002 @109.8 on street tires w/a 1.96* 60 ft. Update 11.89@115 1.63 60ft [This message has been edited by SKYWLKR (edited 01-12-2001).]