MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old 08-21-2002, 08:37 PM   #4
Agent_4573
Registered Member
 
Join Date: May 2002
Location: New Jersey
Posts: 375
Default

If you run it with slicks and drag springs before beefing up the tranny, clutch, and rear you'll be on your way to a high 12 car.You'll have a 12 second car or about the first 60 feet or so before all this new found traction throws a gear threw the side of your stock t-5 or a clutch right threw the bellhousing. I wouldn't go any more than drag radials with the stock drivetrain, especially if your planning on shooting more hp in w/ some nitrous. Go with a set of roller rockers, lower control arms, possibly a junkyard electric fan assembly, and some underdrive pulleys. That should put you into the high 13's, then you get bigger stuff like heads,cam, etc. from there.
__________________
'89 LX 5.0, off-road h pipe, flowmaster muffs, underdrive pulleys, rebuilt WC T-5, King Cobra Clutch, 65mm throttle body, Explorer Upper/GT40 lower, Lakewood Rear Lift Bars. 76mm C&L Mass air w/ inlet pipe, Twisted wedge heads w/ stage 2 port,polish, MAC equal length shorties, Billet AFPR, 255LPH fuel pump, fresh low end w/ 10.5:1 compression.

If anyone ever wants to go to Raceway Park in Englishtown New Jersey, give me a shout.

RICER HATERS CLUB MEMBER 87!
www.ricehatersclub.com
Agent_4573 is offline   Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:14 PM.


SEARCH