Heating Problems Gone!!

Smokedawg · 06-14-2001, 02:25 PM

As I already stated.."THE HEATING PROBLEM IS FIXED!"..I am not going to go switching my thermostat or radiator..I am still running my underdrive crank pulley which is all I care about in the pulleys. I will think about a hi-flow waterpump down the road but for now its fine.

jimberg--thats for all the info on the thermostat..I know how they work though

To sum it up it less words than you did:
Once my motor heats up to 160 degrees..The thermo opens up to cool it down.

I tried a 180 before but by the time my temp hit 180..My temp guage never would stop rising..

------------------
347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC del, rear seat del.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
what if any problems with your Modular Model Gt/Cobra?	fixer	Modular Madness	18	04-03-2005 09:18 AM
Over heating & starting problems	ruquick	Windsor Power	17	08-01-2004 08:20 PM
HELP: Problems after Paxton Novi 1000 install	Meatman	Windsor Power	3	10-17-2002 06:03 PM
'65 - Pull Away Problems - Action Plan	geordie	Classic Mustangs	0	05-14-2002 01:43 PM
Heating Problems	Smokedawg	Windsor Power	6	04-06-2001 04:57 PM

06-14-2001, 02:25 PM	#5
Smokedawg Tires Fear Me... Join Date: Jan 2001 Posts: 867	As I already stated.."THE HEATING PROBLEM IS FIXED!"..I am not going to go switching my thermostat or radiator..I am still running my underdrive crank pulley which is all I care about in the pulleys. I will think about a hi-flow waterpump down the road but for now its fine. jimberg--thats for all the info on the thermostat..I know how they work though To sum it up it less words than you did: Once my motor heats up to 160 degrees..The thermo opens up to cool it down. I tried a 180 before but by the time my temp hit 180..My temp guage never would stop rising.. ------------------ 347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC del, rear seat del.