Edelbrock garbage

Stang951 · 06-15-2001, 12:45 PM

The head gaskets were put on correctly. My friend even tore the motor down again to make sure of that. According to what Edelbrock told his co-worker, the play in the stock valvetrain will cause excessive heat build up relatively quick...hence that is why you have to use the adjustable rocker arms - to remove the slack.
. I just got back from the shop and here is what I saw. When bolted all the way down, the pedestal guide has about 1/10" (maybe a little less) play. What I mean is that you can move the rocker up and down. Several people said I need shims and I believe they are correct. I just got back from Ford and I got one pack, even though now that I look at them I think I should have gotten two. Once these are installed I will let everyone know how it turned out.
Thanks for the help.

------------------
1988 Mustang LX w5.8/ 1993 Thunderbird LX 5.0 / 1990 5.8 block/ Edelbrock Perfromer Intake/ Edelbrock Performer RPM cam and lifters/ Edelbrock Performer street pump/ Edelbrock timing gears/ Ronald Boudreaux custom headers and exhaust/ Flowmaster 2 chamber mufflers/ March Performance billet aluminum underdrive pulleys/ MSD billet distributor/ MSD 6AL ignition box/ MSD Superconductor wires/ Energy SUspension polyurethane engine and transmission mounts/ Omega adjustable Roller rocker arms / Ford M

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Edelbrock RPM Package	jim_howard_pdx	Classic Mustangs	2	10-28-2002 04:57 PM
Experience with Edelbrock RPM Package	jim_howard_pdx	Windsor Power	0	10-27-2002 01:10 AM
Edelbrock Upper W/ Truck Lower??	IMPULSERACING	Windsor Power	2	04-16-2001 02:05 PM
Is the true about Edelbrock heads with TFS intake?	gt93mustang	Windsor Power	14	03-06-2001 07:01 PM

06-15-2001, 12:45 PM	#1
Stang951 Registered Member Join Date: Apr 2001 Location: Metairie, La. USA Posts: 132	The head gaskets were put on correctly. My friend even tore the motor down again to make sure of that. According to what Edelbrock told his co-worker, the play in the stock valvetrain will cause excessive heat build up relatively quick...hence that is why you have to use the adjustable rocker arms - to remove the slack. . I just got back from the shop and here is what I saw. When bolted all the way down, the pedestal guide has about 1/10" (maybe a little less) play. What I mean is that you can move the rocker up and down. Several people said I need shims and I believe they are correct. I just got back from Ford and I got one pack, even though now that I look at them I think I should have gotten two. Once these are installed I will let everyone know how it turned out. Thanks for the help. ------------------ 1988 Mustang LX w5.8/ 1993 Thunderbird LX 5.0 / 1990 5.8 block/ Edelbrock Perfromer Intake/ Edelbrock Performer RPM cam and lifters/ Edelbrock Performer street pump/ Edelbrock timing gears/ Ronald Boudreaux custom headers and exhaust/ Flowmaster 2 chamber mufflers/ March Performance billet aluminum underdrive pulleys/ MSD billet distributor/ MSD 6AL ignition box/ MSD Superconductor wires/ Energy SUspension polyurethane engine and transmission mounts/ Omega adjustable Roller rocker arms / Ford M