another stupid cam ?

Edelbrock dyno'd their intake, cam, carb combo's and gave their recomendations for each specific part,,,,

you said you have a torker II manifold??

Edelbrock recomends their;

Torker-Plus Camshaft/Lifters/Lube Package #5082*
Use Edelbrock #7820 or #7811 timing chain set or #7892 Accu-Drive gear drive. DO NOT use stock timing set.

Duration at .006 Lift: Intake 290° Exhaust 300° Centerlines
Duration at .050 Lift: Intake 224° Exhaust 234° Lobe Separation: 110°
Lift at Cam: Intake .310 Exhaust .325 Intake Centerline: 106°
Lift at Valve: Intake .496 Exhaust .520
Timing at .050 Lift: Open Close
Intake 6° BTDC 38° ABDC
Exhaust 51° BBDC 3° ATDC


???


------------------
Black,84 GT,ground effects,shorty headers, 'open' dual exh.,302 HO(no pollution control crap),T5,89 ported heads,edelbrock Performer manifold, Edelbrock 2122 cam,600 Holley, high volume oil pump...

4:10's on their way!!!!