Difference between stock heads and GT-40P's?

Shotgun28 · 01-18-2001, 01:21 PM

JOSH91:

Thank you for all of the info, I see that you have the GT-40P heads and I was wondering if you like them, and was there a good increase in h.p and torque? I believe my h-pipe is a shorter h-pipe than usual to go with my present headers. So in essence I am trying to dsecide if the change is worth it. I figure after all is said and done, I will be paying roughly the same for the GT-40P heads with header and new h-pipe, for a new set of edelbrock or another after market head, and I am just trying to see if you like your present set-up, your set-up is very much like what I am planning with a few changes here and there.Central Coast Mustang has a deal with the heads,headers and cobra intake and I was thinking would that combo work well? Thanks for all your help.

------------------
91 LX Convertible Gray on Red B&M Shift improver kit, March underdrive pulley's Richmond 3.73 gears, 1 5/8 Flowtech long tube Headers and off road h-pipe, Flowmaster 2-chamber cat-back with S.S exhaust, MSD 6A Ignition with coil,Cap and rotor, Taylor Pro wires, K&N 12" conical filter system, Jet stage 2 performance chip and Lentech Street Terminator plus on it's way...just ordered some new Red alum pulley's. Doing some big shopping of late, I will keep you posted.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SystemaxII intake and Box stock RPM heads	NewAge 5.0	Windsor Power	4	01-18-2002 12:52 AM
Anybody use the GT-40P headers on stock heads?	Scappoose	Windsor Power	3	01-15-2002 06:38 PM
TFS or Yates Heads on stock block???	Stang Runner	Windsor Power	4	08-18-2001 02:19 PM
? on stock heads	vande97	Windsor Power	12	06-21-2001 11:35 PM
Which heads for stock motor?	SlowStang2	Windsor Power	10	06-18-2001 07:44 PM

01-18-2001, 01:21 PM	#8
Shotgun28 Registered Member Join Date: Sep 2000 Location: New Hope MN USA Posts: 276	JOSH91: Thank you for all of the info, I see that you have the GT-40P heads and I was wondering if you like them, and was there a good increase in h.p and torque? I believe my h-pipe is a shorter h-pipe than usual to go with my present headers. So in essence I am trying to dsecide if the change is worth it. I figure after all is said and done, I will be paying roughly the same for the GT-40P heads with header and new h-pipe, for a new set of edelbrock or another after market head, and I am just trying to see if you like your present set-up, your set-up is very much like what I am planning with a few changes here and there.Central Coast Mustang has a deal with the heads,headers and cobra intake and I was thinking would that combo work well? Thanks for all your help. ------------------ 91 LX Convertible Gray on Red B&M Shift improver kit, March underdrive pulley's Richmond 3.73 gears, 1 5/8 Flowtech long tube Headers and off road h-pipe, Flowmaster 2-chamber cat-back with S.S exhaust, MSD 6A Ignition with coil,Cap and rotor, Taylor Pro wires, K&N 12" conical filter system, Jet stage 2 performance chip and Lentech Street Terminator plus on it's way...just ordered some new Red alum pulley's. Doing some big shopping of late, I will keep you posted.