miss then no miss

Just me · 11-17-2002, 04:39 AM

Thanks. The plug that I pulled wasn't black,just wet. Maybe there wasn't enough time to turn black before I pulled it. I don't have a stock FPR, I have a Areomotive billet adj FPR. I'll swap out that injector to see if thats the deal. What about the distributor module? What does that do when it goes bad? If it helps, here's what I got mostly 2 years ago. Thanks again.

91'lx, 302 block, crank pulley, no smog, short belt, Wolverine 1087 cam, 15 deg timing, TFS TW heads, motorsport 1.6 3/8 stud RR, ARP studs, TFS chrome hardened push rods, 24lb inj, BBK 255lph fuel pump, Areomotive billet adj FPR, Performer RPM intake(ported to 75mm), 1" spacer, Motorsport polished tall valve covers(love em), Pro-M 77, Acufab 75mm TB, Ford idle air bypass valve, K&N conical, MSD 6AL and coil, 9mm MS cables, NGK bkr5e 11 plugs@55, motorsport 3 core radiator,160 thermostat, Hurst short throw, motorsport 410 gears, aluminum drive shaft,Kenny brown Subs, Mac 1 3/4"Long tube, custom 3"off road xpipe, 2 chamber Flow Masters, 3 1/2" tailpipes HAL tubular K-member, KYB struts and shocks, Eibach springs, Steeda 2.5" Cowl, Steeda rear wing, black Dupont centari acrylic enamel paint.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
High rpm miss?	72GrabberMav	Windsor Power	2	05-11-2004 10:21 AM
ATTN PKRWUD: Got a BAD MISS	Coupe Devil	Windsor Power	5	08-06-2002 08:48 AM
Mysterious Miss	ChemicalSmile	Windsor Power	2	05-08-2002 12:32 AM
95 GT miss fire at idle	Mustang Cain	Windsor Power	7	02-24-2002 12:43 AM
BOOSTER or MASTER CYLINDER cause the car to miss up ??	HAITHAM	Windsor Power	13	01-23-2002 01:15 AM

11-17-2002, 04:39 AM	#6
Just me Registered Member Join Date: Nov 1998 Location: Miami,Florida Posts: 159	Thanks. The plug that I pulled wasn't black,just wet. Maybe there wasn't enough time to turn black before I pulled it. I don't have a stock FPR, I have a Areomotive billet adj FPR. I'll swap out that injector to see if thats the deal. What about the distributor module? What does that do when it goes bad? If it helps, here's what I got mostly 2 years ago. Thanks again. 91'lx, 302 block, crank pulley, no smog, short belt, Wolverine 1087 cam, 15 deg timing, TFS TW heads, motorsport 1.6 3/8 stud RR, ARP studs, TFS chrome hardened push rods, 24lb inj, BBK 255lph fuel pump, Areomotive billet adj FPR, Performer RPM intake(ported to 75mm), 1" spacer, Motorsport polished tall valve covers(love em), Pro-M 77, Acufab 75mm TB, Ford idle air bypass valve, K&N conical, MSD 6AL and coil, 9mm MS cables, NGK bkr5e 11 plugs@55, motorsport 3 core radiator,160 thermostat, Hurst short throw, motorsport 410 gears, aluminum drive shaft,Kenny brown Subs, Mac 1 3/4"Long tube, custom 3"off road xpipe, 2 chamber Flow Masters, 3 1/2" tailpipes HAL tubular K-member, KYB struts and shocks, Eibach springs, Steeda 2.5" Cowl, Steeda rear wing, black Dupont centari acrylic enamel paint.